Instructions / Assembly

ENGLISH

Thank you for purchasing this Pster product. All Pster products

are carefully engineered, and factory tested to provide long

trouble-free use under normal conditions. This product is easy

to install using basic tools and our easy to follow illustrated

instructions. If you have any questions regarding this product,

call 1-800-Pfaucet (1-800-732-8238).

1 BEFORE PROCEEDING

WARNING: Read all the instructions completely before proceeding. Pster

recommends calling a professional if you are uncertain about installing this product!

This product should be installed in accordance with all local and state plumbing and

building codes.

2 SHUT OFF WATER SUPPLY

Locate water supply inlets and shut off the water supply valves. These are usually found

under the sink or near the water meter. If you are replacing an existing faucet, remove

the old faucet from the sink and clean the sink surface thoroughly.

3 TOOLS RECOMMENDED

• Plumber's putty • PTFE Plumber's Tape • Slotted screwdriver

• Adjustable wrench • Pliers • Flashlight

• Cloth

Your installation may require new supply lines and / or shut-off valves or other additional

tools.

4 ROD CONNECTION

Insert Lift Rod (4A) into hole at the back of Faucet Body (4B).

5 INSTALLING FAUCET WITH SINGLE HOLE MOUNTING

Ensure that Seal Ring (5A) is pressed onto Base Ring (5B). Ensure that Ring (5F) is

placed onto the base of Faucet Body (5G). Place a bead of plumber’s putty in the groove

along the bottom outer edge of Seal Ring (5A). Place Base Plate and Base Ring on top

of Hole (5C) of sink. From above sink, insert Threaded Shank (5D) and Supply Tubes

(5E) through Hole (5C) on sink.

6 INSTALLING FAUCET WITH DECK PLATE

Ensure that the Plastic Putty Plate (6A) is pressed on the Deck Plate (6B). Ensure that

Ring (6F) is placed onto the base of Faucet Body (6C). Place a bead of plumber’s putty

in the groove along the outer edge of the Putty Plate (6A). Assemble Deck Plate (6B)

and Putty Plate (6A) to Faucet Body (6C). With the handle and spout facing forward,

carefully install the Faucet Supply Tubes (6D) through the center hole of sink (6E).

FAUCET INSTALLATION