Installation Guide

ENGLISH

7 WATER SUPPLY CONNECTIONS

Connect water Supply Lines (7A) to Faucet Inlets (7B). Hot water supply lines go into left

inlet. Cold water supply lines go into right inlet. (Supply lines are not included). Please

follow manufacturer’s instructions when installing supply lines.

8 POP-UP ROD CONNECTION

Insert Lift Rod (8A) into hole at the back of Spout (8B).

9 POP-UP INSTALLATION

Install and adjust Pop-Up (9A) using separate instructions supplied with the Pop-Up

assembly.

10 UNIT START UP

Turn on hot and cold water supplies, and check for leaks above and below the sink.

11 VALVE FUNCTION

By lifting the Lever Handle (11A) up, the valve will be activated allowing water to ow.

The water ow will increase by continuing to lift up the Lever Handle (11A). By rotating

the Lever Handle counter-clockwise, the water temperature will decrease to cold ow

only. By rotating the Lever Handle clockwise, the water temperature will increased to

hot ow only.

DRAIN BODY INSTALLATION

FAUCET FUNCTION

HOT

COLD

HOT

COLD

OPEN

11A