Installation Guide

ENGLISH

1210

10 HANDLE ATTACHMENT

Place Plastic Seal Rings (10A) against the bottom of Handle Hubs (10B). Connect

Handles (10C) onto Valves (10D).

11 SECURING HANDLES

Be sure Valves and Levers are in the “OFF” position. Secure handles by holding the

Lever (11B) in place and tighten the Hubs (11A) by rotating them in a clockwise direction.

To remove handles, rotate Hubs (11A) in a counterclockwise direction.

12 HOSE GUIDE INSTALLATION

Insert Guide Holder (12A), Hose Guide (12B) and Washer (12C) into Decorative Hose

(12D). Remove Clip (12E) and Plaster Guard (12F) from Spray Hose (12G).

From underneath deck, slide Washer (12H) and Locknut (12J) into Spray Hose (12G) as

shown. Apply PTFE plumber’s tape to threaded end of Decorative Hose (12D) according

to manufacturer’s instructions. Attach Spray Hose (12G) to Decorative Hose (12D).

Connect Guide Holder (12A) onto Hose Guide (12B). Insert Hose Guide (12B) through

Washer (12C) and into Deck Hole. From underneath deck, secure Hose Guide (12B)

by screwing Locknut (12J). Be sure Guide Holder (12A) is centered and facing forward

before nal tightening.

12D

12B

12C

12A

12B

12C

12B

12E

12F

12G

12J

12H

10C

10D

10A

10B

11B

11A