Installation Guide

ENGLISH

1210

10 VALVE FLANGE INSTALLATION

Place Plastic Base (10A) and Flange (10B) over Valve Body (10C) covering the Valve

Body Washers (10D). Secure by threading the Plastic Nut (10E) onto the Valve Body

(10C).

11 HANDLE INSTALLATION

Before proceeding, Valve Stems (11B) are to be set in the closed position.

Place Handle Hub (11A) onto Valve Stem (11B), connect Lever (11D) onto Handle Hub

(11A). Attach and secure with Screw (11C). Attach Decorative Button (11E).

12 HOSE GUIDE INSTALLATION

Insert Guide Holder (12A), Hose Guide (12B) and Washer (12C) into Decorative Hose

(12D). Remove Clip (12E) and Plaster Guard (12F) from Spray Hose (12G).

From underneath deck, slide Washer (12H) and Locknut (12J) into Spray Hose (12G) as

shown. Apply PTFE plumber’s tape to threaded end of Decorative Hose (12D) according

to manufacturer’s instructions. Attach Spray Hose (12G) to Decorative Hose (12D).

Connect Guide Holder (12A) onto Hose Guide (12B). Insert Hose Guide (12B) through

Washer (12C) and into Deck Hole. From underneath deck, secure Hose Guide (12B)

by screwing Locknut (12J). Be sure Guide Holder (12A) is centered and facing forward

before nal tightening.

12D

12B

12C

12A

12B

12C

12B

12E

12F

12G

12J

12H

10B

10A

10C

10D

10C

10E

10A

10B

11A

11B

11C

11E

11C

11D