User guide

ENGLISH

DRAIN BODY INSTALLATION

11 HOSE CONNECTION TO SPOUT BODY

From underneath sink, push the Center Connector (11A) onto Receiving Tube (11B),

until unable to push any further. Pull down on the quick connect housing (11A). If the

housing and the Inner Collet (11C) separate slightly but do not pull off the Receiving

Tube (11B), the connection is secure.

12 HOSE CONNECTION TO VALVE BODY

Slide the End Connectors (12A) with arrow (12D) pointing up onto the Valve Bodies

(12B). Push the End Connectors (12A) all the way up until completely seated. Be

careful not to damage O-Rings (12C). Place Clips (12E) onto End Bodies (12B) to

secure End Connectors (12A).

13 WATER SUPPLY CONNECTIONS

Connect water Supply Lines (13A) to Faucet Inlets (13B). Hot water supply lines go into

left inlet. Cold water supply lines go into right inlet. (Supply lines not included). Please

follow manufacturer’s instructions when installing supply lines.

14 POP-UP INSTALLATION

Install and adjust Pop-Up (14A) using separate instructions supplied with the Pop-Up

assembly.

HOT

COLD

11A

11B

11C

12A

12D

12A

12C

12B

12E

12C

13A

13B

14A