User guide

ENGLISH

WAX SEAL INSTALLATION

BIDET INSTALLATION

1 BEFORE PROCEEDING

WARNING: Read all the instructions completely before proceeding. Price

Pfister recommends calling a qualified plumber if you are uncertain about installing

this product!

This product should be installed in accordance with all local and state plumbing and

building codes. Vitreous china is heavy and fragile. Use extreme care with all

parts!

2 SHUT OFF WATER SUPPLY

Locate water supply inlets and shut off the water supply valves. These are usually found

behind the toilet or near the water meter. If you are replacing an existing toilet, remove

the old toilet from the floor and clean the finished floor surface thoroughly.

3 TOOLS RECOMMENDED

• Silicon sealant • Slotted screwdriver • Adjustable wrench

• Pliers • Electric drill • Cloth

• Measuring Tape • Safety glasses • Jigsaw

Your installation may require new supply lines and / or shut-off valves or other

additional tools.

4 INSTALL NEW WAX SEAL (Ground Flange Outlet)

Carefully turn Bidet upside down. On a Secure Padded Surface. Place wax seal (4A)

firmly into the outlet of the toilet bowl.

5 BIDET INSTALLATION

Apply a bead of sealant around the base of Bidet (5A). Very carefully set the Bidet’s Base

(5B) over the ground flange outlet fixture.

Thank you for purchasing this Price Pster product. All Price Pster products are carefully engineered, and factory tested to pro-

vide long trouble-free use under normal conditions. This product is easy to install using basic tools and our easy to follow illustrated

instructions. If you have any questions regarding this product, call 1-800-Pfaucet (1-800-732-8238).

Place the Plastic Washer (6A) and Metal Washer (6B) on the Mounting Bolt (6C).

Secure by tightening the Mounting Nuts on to the Mounting Bolts.

Caution: Do not over tighten! Finish by snapping on Plastic Caps (6D) over bolts and

nut as shown.