User Manual

IM_100.CCF.20170512-EN C45
18
Setup and operating
2.2 First steps - charge the accumulator
Warning
Injury danger!
Check the device and the cable before every use. A
damaged device may not be used.
Warning
Injury danger!
Do not take the device in operation in explosive
surroundings! Follow the safety instructions to this 1.5 The use at
ceratin places and environmental conditions.
Tip
Function!
Before the first use, charge the accumulator that the device
works optimally.
Warning
Injury danger!
Never grasp the power adapter with wet hands.
Caution
Property damage!
Use only the delivered power adapter for charging.
Caution
Property damage!
Before plugging the power adapter in to the power
socket, make sure that the electrical data indicated on the rating label
agree with the specification of your power socket. Follow the safety
instructions 1.6 Power supply and operating conditions.
Caution
Property damage!
Always unplug the power adapter only directly. Never
pull at the cable, it could be damaged.
1. Put the power adapter into the fitting power socket.
Connect the connecting plug with the charge jack.
2. The LED of the power adaptor shines red.
3. The LED of the power adaptor shines green when the
charging process is completed. After the completed
charging process pull the power adapter out of the power
socket again.
1