User Manual

IM_100.CCF.20170512-EN C45

Set up and operating

2.3 Assembling and adjustment of the camera

Warning

Injury danger!

Implicitely follow the safety instructions and warning

notices within the instruction manual of your camera!

Caution

Property damage

Implicitly do not unscrew the locking screw of

the roll axis completely. Otherwise, the camera with L-arm to the

pitch motor will drop down and the wiring which is arranged behind

will be damaged.

Tip

Function!

Make sure that both, the camera and the Gimbal remain

switched off during the assembly and adjustment.

Tip

Watch our video on YouTube how to install and balance the

camera: https://www.youtube.com/watch?v=SAkNv1WpnXE

1. Remove the objective lid and make sure that the

battery is fully charged and the memory card is

installed in the camera before you attach the

camera to the Gimbal.

2. Mount camera on the plate. Ensure that the

camera is as close as possible to the pitch motor.

The screw can be removed and placed into the

other slot if necessary.