User Manual

IM_100.CCF.20170512-EN C45

Software Installation

All Pilotfly products use the Alexmos Chip and therefore can be used with the SimpleBGC software which

is provided by Basecam Electronics. The software can be installed on different operating systems, such as

Windows, OSs, Linux and Android App.

Tip

Compatibility problems!

The most actual driver version (6.7.4) for

Windows can lead to problems with the connecting or data

communication. This is to be seen in a raised reaction of the SimpleBGC

software. If this should be the case, please download and install the

driver version 6.7.2.

4.1 Installation on Windows

1. Go to our webseite www.pilotfly.de or www.pilotfly.com.tw on to the support page.

2. Download the most current version of the SimpleBGC software there.

3. Download the most current version of the "CP2102 USBtoUART" driver there.

4. Install the driver CP2102 USBtoUART.

5. Extract the SimpleBGC Software and start the Software with SimpleBGC_GUI.exe

4.2 Installation on Linux

1. Go to our webseite www.pilotfly.de or www.pilotfly.com.tw on to the support page.

2. Download the most current version of the SimpleBGC software there.

3. Extract the SimpleBGC Software and start the Software with run.sh