User Manual

IM_100.CCF.20170512-EN C45
29
Using the Software PC/MAC – Connecting
The surface is seperated into different functional blocks. Under the main menu point "View" you choose the
desired configuration depth (View level). Depending on your user abilities you can set to display more or
less functional blocks for various settings. For beginners, we recommend the view "BASIC". If you are
already a little bit familiar with the functionality of your Gimbal and the software, you can use the view
"ADVANCED" for advanced users. For the use of the extended functionalities in the views "EXPERT" and
"DEVELOPER" please refer to the respective current version of the instruction manual of the SimpleBGC
software. Note that the use happens on your own risk. Pay attention to the safety hints.
5.2 Connecting the Gimbal with the SimpleBGC Software GUI
1.
USB
-
cable
-
connection
.
Connect the device with a Micro-USB
cable. Choose the COM interface in the
drop-down menu and press the button
"Connect". Observe the connection status
shown in the lower area of the window.
9
2.
Bluetooth
-
connection
.
(Optional)
Alternatively connect the device via
Bluetooth. Mark the check box "BLE",
choose the COM interface in the drop-down
menu and press the button "Connect".
The connection status is shown on the
lower area of the window. At a successful
connection, all preinstalled profiles are
downloaded from the device. The settings
of the current profile are displayed.