User Manual

IM_100.CCF.20170512-EN C45
30
Using the Software PC/MAC – Profiles
5.3 Saving and loading profiles onto the computer
A profile corresponds to a set of predefined settings, as for example different default settings for the follow
mode, the rotation speed of the single axes, the orientation of the axes when switching on, time-lapse
settings, axis acceleration, control parameters respectively adapted on your camera weight for the optimum
reduction of vibrations, parameters for jerk-free operating, etc.).
1.
Save a profil
e
onto the computer
.
Store the current profile by pressing the
button "Save". You can rename the profile
by pressing the "Rename"- button.
2. Open profile from computer. Press the
button "Load" to open and load the settings
of a stored profile. The settings of the
loaded profile are displayed.
10
Tip
Function!
Over the „File“ menu you are able to load and save all profile
files at the same time by pressing „Load profile(s) from a file…“ and
„Save all profiles to a file…“. Settings with related to the hardware and
sensor adjustment as well as their configuration stay the same for all
profiles.
5.4 Writing and reading profiles onto/from the Gimbal
1.
Upload a profile to the device
.
Upload the current profile to your device by
pressing the button "WRITE". Only the
current displayed profile will be transfered!
2. Download a profile from the device.
Download all profiles from the device by
pressing the button "READ". The current
profile is displayed.
11
Tip
Function!
With the successful connecting of your Gimbal with the SimpleBGC
software GUI all profiles within the device are read out. Implicitly save your
profiles before you change any settings and write them onto your Gimbal 
5.3 Saving and loading profiles.