User Manual

IM_100.CCF.20170512-EN C45
35
Using the Software PC/MAC - BASIC
RC-Settings (Joystick settings) - Continued
Deadband arround center – Set a dead zone around the neutral centre of the remote control or the
joystick to eliminate accidentally drifting by shaking or RC inaccuracies.
Expo curve – Function provided only with selected speed mode. Higher values slow down movements
around the neutral position of the remote control what allows a more exact manual positioning for small
movements. Nevertheless, big movement segments become more inexact.
Tip
Tip!
Watch our video on YouTube how to setup the RC-settings:
https://www.youtube.com/watch?v=y_-kQxFqcpk
Caution
Function
!
The software SimpleBGC offers further possibilities, which are
however not necessary for the use and the adjustment of the Pilotfly Gimbals.
Thus, these functions are not described within the context of this introduction
manual. For the use of this extended functionality we refer you to the user
manual of the SimpleBGC 32bit 3-Axis software, which you can download in its
newest version from our web side www.pilotfly.de. The performing of functions
which aren't described to your Pilotfly product within the context of this
instruction manual happens on your own responsibility. Pay attention to the
safety hints.
5.8.2 Follow-Mode
The follow mode is a special mode with which the camera follows the movements of the Gimbal. We
already have set for you the most useful modes of operation for the follow mode in the profiles from 1 to
4, which you can adjust directly over the Mode-butto by quick choice Product overview – Mode button.
Here you can set further settings for the follow mode:
Disabled – The roll-axis and the pitch-axis are locked. The additional locking of the yaw-axis and
completely deactivating of the follow mode, you can decide by marking the check box "Follow Yaw".
Follow Yaw – Deactivate this check box to lock the yaw-axis. Together with the setting "Disabled" all
three axes are locked and the follow mode is deactivated completely. The camera keeps its orientation
independently of the orientation of the Gimbal.
Follow Flight Controller – The camera can follow additional signals of an external control. Because this
option is not needed for the standard use and additional settings under the View level "Advanced" would
be necessarry, we refer you to the software user manual SimpleBGC 32bit 3-Axis.
Temporarily disable follow mode – Mark this check box if you want to deactivate the follow mode
temporarily (< 5s) as long as you press the Mode-button. Then the camera keeps its orientation
independently of the orientation of the Gimbal.