User Manual

IM_100.CCF.20170512-EN C45
40
Using the Software PC/MAC - ADVANCED
5.9.5 Stabilization (Reducing vibrations)
If you feel vibrations by using the Gimbal in combination with your camera, you can optimize and stabilize
your system by means of the PID-parameter settings  5.13 Fine-tuning by adjusting the PID settings –
ADVANCED
5.9.6 Monitoring (Real-Time view of the sensors - raw data)
Use the monitoring of each sensor raw-data stream to detect even the finest irregularities of your device.
Optimize and stabilize your system by means of the PID-parameter settings  5.13 Fine-tuning by
adjusting the PID settings – ADVANCED
5.9.7 Hardware (Calibration of the gyrometer and accelerometer)
Within this register tab you can calibrate your system:
 5.6 Calibrating the gyrometer
 5.7 Calibrating the accelerometer
Furthermore, you can choose whether with every switching on of your Gimbal a gyroscope calibration
should be automatically performed.
Automatic gyro calibration – Our default setting: “Skip calibration and use saved values”
5.9.8 Adjustable Variables
Please don’t change any settings in this tab for the correct use of your Pilotfly Gimbal.
Use on your own risk.
5.9.9 Scripting
Please don’t change any settings in this tab for the correct use of your Pilotfly Gimbal.
Use on your own risk.