Setup and Troubleshoot

Brings images to fly
Your Pilotfly H2 gimbal is configured to work out of the box. To operate your gimbal correctly
please ensure your camera is securely fastened in the gimbal and your camera and gimbal are
calibrated properly.
● Please watch this video to properly calibrate your gimbal.
● When calibrating please ensure to replace the balancing screws to their default position.
This will avoid “spinning” Watch Here.
** For Advanced Users Only*
You can download the newest version of the BGC software to further customize your H2’s
settings.
To download the newest software click HERE.
To view a list of suggested settings for your camera and lens configuration please click HERE.
** Troubleshooting**
If you are experiencing any issues with setup or if your gimbal is not acting correctly you can
email - [e-mail] for fast and friendly support.
Most common issues can be resolved by watching these video and viewing the FAQ’s HERE.