Quick start Guide

Operating instruction of the "Mode" button.
Single tap
Press & Hold 3 sec
Operation Function
Triple tap
Prevent any movement or vibrations during the Gyro calibration.
【Head mode】
Camera stays in its current orientation.
Will initialize the Gyro calibration
Quadruple tap
【Portrait mode】
Five times tap
Gimbal follows your movements on all three axes.
【Follow Roll】
Gimbal rotates the smartphone into portrait view and keeps in active mode.
【Follow mode】
Double tap
【Lock mode】
SIMPLEBGC32 APP
SIMPLEBGC GUI
USB Driver
Welcome to PILOTFLY Facebook
http://www.facebook.com/Pilotflytech
Explanation
2
1 3
4
5
Description
Quick Installation Function & Button intro
Bluetooth Connection
Software Driver download
Function Status Description
Specification
Audio alerts:
Power on
Initialisation tone of gimbal
Calibrating
Low Battery 
System boot up and initialisation
Be~Bi~Li~Bi~Li
Dn~Dn~Dn~Dn~Dn~Dn ~
Continuous cricket sound
Operating instruction of function button & Joystick:
1
Camera follows your movements
2
Camera is locked and horizontal levelled, while panning is possible.
3
Camera is locked on
4
Rotates the smartphone into portrait view.
5
The gimbal will recognize automatically the invert mode. In this condition
your are also able to switch between other modes as described above.
Follow mode
Lock mode
Head mode
Follow Roll
Portrait Mode
Mode button:
Push the button to
switch between different
modes or to calibrate
the IMU sensor.
4-Way-Joystick:
Panning and tilting in any
mode(While running a
script which can be
programed via
SimpleBGC software, the
4-way-Joystick and follow
mode function will be
automatically disabled.)
The SP1 is equipped with a Bluetooth
module and can be remotely controlled via
Smartphone Android App (SimpleBGC32) or
Pilotfly Remote control RM-1.
Connect the SP-1 with PC or MAC via USB cable to
adjust the settings or to upgrade the firmware.
Size:
Weight:
Batteries:
Voltage range:
Movement range:
Operation System:
309 x 86 x 79 mm
360 g
4S 14.8V 600mAh Lipo rechargeable
batteries- Usage time 8 hours
14~16.8 V, 0.11A~0.8A
Tilting angle / Top 90°,Down90°
Rolling / Left 50°, Right90°
Yaw / 360°
Precision / min ±0.01° max±0.04°
Windows, MAC OSX, LINUX and Android APP
The pitch and heading direction to follow to maintain a balance manually.
Pitch and Roll lock to the horizontal, Yaw follow to target
Backup profiles to your computer.
Technical Support via E-mail:
info@pilotfly.de , pilotfl[e-mail]
QuickGuide
Bluetooth pairing password:1234
Auto pairing
Remote shutter
BT ID:
Pilotfly-SUT
StabilisationsystemforSmartphone
ON
OFF
ON
OFF
Pull up the smart phone holder
to insert your smartphone.
Slide in your Smartphone and shift it left
and right to get the center of graphity.
Additional weight might be necessary for bigger
smartphones to get the center of graphity.
Once your smartphone is
balanced you can power on the
gimbal with the power switch on
the side of the handle.
For Portrait Mode (Mode 4) the joystick
works inverted.
Handle working range position can be highly
adjusted depending on your needs, while
camera stays in portrait mode.
4-way-joystick
1/4" screw hole
power switch
On/Off
Shutter
button
USB connection
(no charging)
DC input for
charging
Mode button
Gimbal follows your movements on all three axes.
6
Invert Mode