Instruction Manual

Product Description:
This product is an AI inductive vacuum wireless charger. It has exclusive national and international
patents. It is the first electronic product with innovative technology through continuous research and
development in this few years. This product complies with global industry standards and has passed all
the safety testing and standards.
产品描述:
本产品为智能感应式真空吸无线充电器,享有独家国家及国际专利,通过不间断研发,成为首个拥有
创新技术的创新型电子产品,本产品附合国家行业标准,及通过了行业的所有检测标准.
Product Features:
Working Voltage: DC, 5V-12V
Working Current: DC, >2A
Output Power: 12V – 15W, 9V – 7.5W, 5V – 5W
Working Environment Temp.: -20 degree to 60 degree
Working Humidity: 30% to 90%
Suction Pressure: Min -20KPA and Max -40KPA
产品特征:
工作电压: 直流: 5V-12V
工作电流: 直流: >2A
输出功率: 12V- 15W,9V-7.5W, 5V-5W
工作环境温度: -20 度 - 60 度
工作环境湿度: 30%-90%
吸咐压力:( Min:-20KPA,Max:-40)
How to set upSmart Mount/
如何安装
Smart Mount
A) Air vents Mount
Works with horizontal or vertical air vent
適用於水平或垂直風口位
/
适用于水平或垂直风口位。
1. Plug the cable into the Micro USB port
2. Engage the mount to the fin of air vent
1.
將電源線連接充電支架的
Micro USB
插口。
2.
按下打開夾子
·
將夾子夾在風口位的翅片上