User Guide

Chapter 14: Reference
281
Auto-Send GS Mode On at startup sends a Roland GS system on message when the Band-in-a-Box program
boots up.
Auto-Send XG Mode On at startup sends a Yamaha XG system on message when the Band-in-a-Box program
boots up.
Turn Local OFF / ON (external MIDI keyboard)
“Local” refers to music playing on an external MIDI keyboard. If set to “Off,” Band-in-a-Box will play the
keyboard via the THRU part. If set to “On,” both Band-in-a-Box and the keyboard might be playing the same Thru
part.
When program quits, turn Local ON automatically turns the external MIDI keyboard back on at the end of the
Band-in-a-Box session.
Master Tuning… allows you to master tune your sound card or sound module. This is useful if you're playing
along with an instrument or recording that can't easily be re-tuned like an acoustic piano. A setting of 0 is the
default A = 440.
Note: Not all sound cards/ modules support Master Tuning. To see if your sound card supports Master Tuning, press the
[Test..] button.
Master (Combo) Volume Adjust submenu
Master Volume uses MIDI messages instead of GS/GM Sysex should be set by all users except if you have a
Roland GS synth, Roland Sound Canvas, or Roland VSC. If set, the Combo settings will allow Master Volume and
other MIDI settings to work. This submenu allows you to set whether to use Roland - GS or General MIDI for
Master Volume messages. Unless you have a Roland you should select General MIDI.
If you want to “turn it all up or down,” this can be done quickly with menu commands or hot keys to set the Master
Volume. There are also hot keys that control the overall volume by reducing (or increasing) volumes on all parts by
5 to simulate a Master Volume effect (especially useful for sound cards that don't support Master Volume changes).
These items also have hot keys as listed on the menu (Ctrl+Alt+Shift Q, W, and E). Commands and hot keys are
also provided to change the volume of the current part only.
Set Panning to MONO sets the panning of your Band-in-a-Box parts (Bass, Drums, Piano, etc.) to mono.
Set Panning Mode to Stereo sets the panning of your Band-in-a-Box parts (Bass, Drums, Piano, etc.) to a typical
stereo setup, which is saved with the preferences.