User Guide

Chapter 6: Band-in-a-Box PowerGuide
89
- General MIDI 2 support: If you're using the Roland VSC3, or a newer Sound Canvas then choose this GM2
support.
- Roland GS (older Modules): “Older” Sound Canvases (SC55/SC88) support GS, but not GM2. The good
news is that they have the same patches available, just at different locations. So if you choose this option,
Band-in-a-Box will find the patches at the “GS” locations instead of the “GM2” locations. If you have a newer
GS module like the SC8820 that supports both GM2 and GS you should likely choose GM2.
- No GM2 support: Most sound cards don't have GM2 support yet, so just support the original 128 General
MIDI sounds. Band-in-a-Box will use the closest instrument in these cases.
You can select the GM2 patch using the GM2 button next to the Instrument box. This shows a menu
organized by instrument types.
Technical note: For a GM patch like Nylon Guitar the patch is 25. For a GM2 patch like Ukulele, the patch is also 25, but it
is accompanied by two bank settings, MSB Bank Controller 0 setting of 121 and LSB Bank Controller 32 setting of 1.
When you select the instrument from this menu, it will make the bank settings (Bank0 and LSB) for you. You can
also change the bank #s directly, and the patch in the box will change. GM2 patches can also be selected elsewhere
in the program, such as the Edit Settings for Current Bar dialog and the StyleMaker.
Changing Volume, Panning, Reverb, Chorus, Bank
To change the Volume, Panning, Reverb, Chorus, or Bank of a part, click on the desired part to change.
Then click on the spin control arrow keys to increase or decrease the setting.
- The left mouse button increases/decreases by 5 at a time.
- The right mouse button increases/decreases by 1 at a time.
You can also click directly on the number field to open a dialog and type the value in directly.
Chase Volumes.
For a file with Volume change events (Controller 7) written into the Melody (or other tracks) – if the song is played
back from somewhere in the middle, the most recent volume setting prior to the start of playback will be sent.
Solo an Instrument Part
While listening to Band-in-a-Box, you can easily solo (isolate) a certain part by holding the Ctrl key and mouse
clicking (left or right) on the instrument at the top of the screen. For example, if you want to hear only the Piano
part, Ctrl+click on the Piano part. If you want to use hot keys for this, you can press Alt+2 (Mute-All) and then
Alt-+4 (Unmute Piano).