Instruction Manual

Chapter 14: Reference
442
Boost THRU Velocity by
When playing along on a keyboard to the Band-in-a-Box “band,” if the sound of your keyboard is too quiet and
increasing the THRU Volume doesn't help enough, use this option to boost the THRU velocity and make your
THRU playing louder.
Output Sync/Start info: Syncs Band-in-a-Box with an external sequencer.
Send Extra Note Offs: Leave this option set to “No” unless you are having trouble with “Stuck Notes” when you
press [Stop]. If you set this option to “Yes” the program will send a “global sweep” of all notes off in addition to
the selected notes off that are playing when you press the [Stop] button.
Allow Any Patch Changes: Set to “No” to disable All Patch changes.
Song Patch Changes: Songs can be saved with patch changes. If you want to prevent specific instruments loading
for a given song, set this option to “No.”
Style Patch Changes: Styles contain patch change information for the instruments that were used when the Style
was created. To use your own instrument selection, not the original instruments, change this setting to “No.”
Drum Patch Changes: To disable patch changes in Drums, set to NO.
Drum Bank Changes: This should usually be left unchecked since most synths don’t use bank changes on drums.
But, if you require drum bank changes then select this option.
Allow Volume Changes: To prevent any volume changes set to “No.”
Style Volume Changes: To stop embedded style volume changes set to “No.”
MIDI Settings
The [Channels] button opens the MIDI Settings dialog.