Upgrade Manual

Chapter 12: Harmony Enhancements 65
Chapter 12: Harmony Enhancements
Harmony Enhancements: Overview
Convert Harmony Part to Notation track.
Previously if you added a harmony
the harmony parts wouldn't be seen on the notation, you would only see the lead
part. Now you can write the harmony part directly to the notation track, so you
can see it and print it out, just like any other part.
(Note: these features are all described for the Melody track, but apply equally to
the Soloist (or THRU) part.)
To convert a melody (or Soloist) track to a Harmony, do the following:
1.
Select the Harmony that you
want to use.
2. Choose the menu item Melody – Convert Harmony to Melody track.
3. Choose the range that you'd like to convert, either the "whole song" or a
portion of the song.
4. Your harmony will now be written to the track, and you'll get a
confirmation dialog.
The harmony may be removed from the track at any time, even after you've
saved and re-loaded the song. This is done from the menu item Melody –
Remove Harmony from the Melody track.
Harmony Maker enhancements.
These new options are present in the Harmony Maker, by pressing the More
button.