Upgrade Manual

Chapter 6: Reverb
29
You can enable/disable the audio reverb. If you disable it, this
will save some CPU cycles, so this might be advisable on an older/slower
machine if you hear that the audio is clicking or not keeping up.
Click on the green Select a Preset button to open the list of presets. This
list will show only the “Band-in-a-Box Default Reverb” until you save some
presets of your own.
As you adjust the settings, they will be applied to the current song. The [Swap
“Default”] button toggles between your current settings and the default settings.
This allows you to hear the effect of the changes you make to the settings.
Use the row of “room” buttons to load typical settings for different types of
spaces. These buttons are a convenient way to either apply a particular effect or
to load settings that you can then tweak to make your own preset.