User Guide

Chapter 8: Automatic Music Features
172
There is an AutoSet Octave setting (discussed elsewhere). If selected, the Guitar Octave
is set automatically.
Use Index Finger Position: If set, the scale will use the “index finger” to play notes that
are one fret outside of the normal position, instead of the little finger.
Show out-of-range notes: If set, any note will be displayed on the guitar, regardless if it
is the range of the guitar or not.
Show muted note of guitar style comping: For the three-note Jazz voicings, there is a
high note that is applicable to the chord but is either not played or muted. You can
choose to display this note on the guitar fretboard.
The note names will get displayed in up to two positions, depending on the settings for
Show Notes at Aeolian Position and Show Guitar at Phrygian Position. (Default =
true)
You can choose which notes will be displayed on the fretboard, either None, Root Only,
Chord Tones, or Scale Tones.
Positions can be auto-set to None, Aeolian, or Phrygian.
The Auto-Switch Position setting allows the program to automatically switch the display
of the guitar when a new track is loaded in. This auto-chooses the best position to display
the track.
The Guitar can be sized using the Guitar Width and Guitar Height setting or the preset
buttons that set the size.