User Guide

Chapter 12: Wizards, Tutors, and Utilities
251
If you elect to not display note names, you can select “Use Inlays” and a Guitar inlay will
be displayed along the neck. The inlays will only display if note names are not being
displayed.
If Send Notes to Notation Window (Default =On) is set, when you click on the Guitar
notes (and the notation window is open in editable notation mode or note roll mode) the
note will be inserted at the current time line on the notation window.
You can set the fretboard octave. For example, if the music is very low, and you need
to boost the octave to display it on the guitar, set the guitar octave to 1 or 2. There is an
auto-octave setting (discussed elsewhere). If selected, the Guitar Octave will get set
automatically.
Use Index Finger position: If set, the scale will use the “index finger” to play notes that
are one fret outside of the normal position, instead of the little finger.
Show out-of-range notes: If set, any note will be displayed on the guitar, regardless if it
is the range of the guitar or not.
The note names will get displayed in up to two positions, depending on the settings for
Show Notes at Aeolian Position and Show Notes at Phrygian Position (Default=True).
The Guitar can be sized using the Guitar Width and Guitar Height setting or the preset
buttons that set the size.