User Guide

Chapter 6: Making Songs in Band-in-a-Box
130
When adding a harmony to the Melody (or Soloist) you can use the option to loosen up start times of for the
harmony notes to achieve a more natural, richer harmony sound.
Choose menu item Melody | Edit | Utilities | Loosen Start Times. You can select the range of adjustments. For
example, if you want the notes to be played earlier, use a negative number. A setting of minus 5 to positive 6 would
cause the start times to be varied up to 5 ticks early and 6 ticks late. There is also a setting to choose whether you
want only the harmony notes present on the track to be affected, leaving the original melody unaffected.
Convert Track to Harmony
This feature permanently writes the specified harmony to the Melody or Soloist track, instead of being applied in
real time. Use the buttons in the Select Melody/Soloist Harmony dialogs, or the Convert Harmony… menu
command found in the Melody and Soloist menus. You’ll then see a dialog allowing you to choose the range of the
song to add the harmony, either the whole song or a specified range of bars.
There are options to “Eliminate Note Overlap” and “Loosen start times of notes” for the harmony notes to achieve a
more natural, richer harmony sound. The melody is not affected, only the harmony notes, and there are options for
the range of spread for the harmony notes.