User Guide

Chapter 8: Notation and Printing
232
Customize your printed sheet music in the Print Options dialog box.
Chords
If selected, this will include the chords of the song on the lead sheet. Remember that you can set the height that the
chords will appear in a different dialog box (the Options Dialog box).
Notes
If you want only a chord lead sheet with no Notes, then turn this off. Otherwise it should be ON.
Staff Lines
Set to off (uncheck) to print a “chords only” fake sheet with chord symbols and bar lines but no staff lines or
notation.
Treble Clef
Normally you will want to include the treble clef unless you're printing a bass part or left hand piano part alone and
want to save space.
Bass Clef
For melodies or solos, you probably won't want the bass clef printed. For other parts (piano, bass, drums, etc.) you
should set this option to YES.
AutoSet Clefs
With this setting the program will print only the clefs that are necessary. For example, a Melody would probably
print with just the treble clef, while a bass part would use only the bass clef, and a piano part would use both clefs.
Tab
Enables tablature display and printout for guitar and bass tracks.
Clef Split At
This determines where the notation will split the treble and bass clefs. Middle C is normally considered to be C5,
and C4 is one octave below. For a melody or soloist part, you will probably want the entire part to be printed on the
treble clef, so you could choose to split the clefs at C4.
Show Bar #s
There are options to include the bar # on the printout (e.g., every bar, every part marker, every row, every page).