User Guide

Chapter 5: Option Panels Settings32
VOLUME - DEFAULT=100
Volume affects the loudness of a given part. If you want to change the overall
loudness of all the parts, use the ALL VOL knob instead.
REVERB - DEFAULT=40
Reverb is a nice sounding effect which "warms up" the sound. Typical setting
is=40 which is about 11 o'clock on the reverb knob.
CHORUS - DEFAULT=0
Chorus is a nice sounding effect which make the sound "more lush". Typical
setting is=40 which is about 11 o'clock on the reverb knob.
PANNING - DEFAULT=MIDDLE
Panning refers to placement of the output to right or left speakers
MUTE - DEFAULT=NO
If you don't want to hear a specific part then click the MUTE button for that
part. For example this would be useful if you want to turn a specific MIDI
part off so that you could play or sing along yourself, or turn another part off
for a quieter sound.
ALL VOLUME - DEFAULT=127
Changing the Volume here affects the overall volume of the sound.
MIDI THRU ENABLED - DEFAULT=ON
MIDI thru is only required if you want to play along with the program from a
MIDI controller without sounds of its own. Setting MIDI Thru to ON will
send the output of the MIDI controller thru the computer and into the sound
module.
NEVER SEND PATCH CHANGES - DEFAULT=NO
Normally you will want the program to be able to send patch changes. But if
you are having trouble with unexpected patch changes somewhere in your
system, you can disable patch changes to ensure that the program is not
sending patch changes.
AUTO HAND-SPLITTING - DEFAULT=YES
This setting is used to differentiate the left and right piano hands. This
checkbox, when active, shows the highest parts in blue on the piano keyboard,
and the lowest parts are displayed in red.
SOUND CARD SUPPORTS BRUSHES
This setting is for the drum parts only. Some more advanced sound cards
support jazz-style brush sounds on the drums. You can disable this if your