User Guide

Chapter 8: Pull Down Menu Items 45
Alternate/Normal Tempo (F5) -
toggles between an alternate (i.e. 3/4 speed) and
normal (i.e. native) tempo.
Half Speed (H) -
toggles between half speed and normal (i.e. native) tempo.
Advance One Chord -(Numpad ‘.’)
advances the song ONE CHORD at a time.
Backup One Chord -
(
Numpad 0
) backs the song up ONE CHORD at a time.
Decrease Tempo by 5 -
(
[
) decreases the playback tempo by 5.
Increase Tempo by 5 -
(
]
) increases the playback tempo by 5.
Send GM Mode-On Message -
sends a General MIDI-Mode On message to your
computer's MIDI sound setup. This command is sometimes required to reset
certain sound modules and soundcards to the GM-Mode. Patches listed in the
MIDI SETTINGS
Panel assume your MIDI setup is set to GM Mode.
Send XG Mode On Message
- sends an XG MIDI-Mode On message to your
computer's MIDI sound setup. This command is sometimes required to 'reset'
certain Yamaha sound modules and soundcards to the XG-Mode.
Play Previous/Next Song -
These menu items move to the previous or next piece
when you are playing a SET of songs (i.e. when playing the "Favorites" or when
Playing the "ALL" Jukebox modes.) Hot Keys are
Shift + F8
and
Shift+Ctrl+F8
.
Toggle Loop On/Off (Numpad 1) | Choose Loop Type -
These features a
llow
you to quickly loop one of the following:
1) a section (using the section selector - HEAD, PIANO SOLO, etc.)
2) loop points (using the overview window)
3) a number of Bars (i.e. 1,4,8,12,24, etc.).
Toggle Audio/MIDI
- (
F4
) toggles between "MIDI Mode" and "Audio (Video)-
SMIDI" mode.
Toggle Playback Mode
- (
Shift-F4
) toggles between all available playback
modes.
Mute Track
- (
Ctrl + M
) allows you to quickly mute or unmute the part currently
selected in the Part Selection list box.
Solo/UnSolo Track - (Ctrl+S)
allows you to quickly "Solo" a part (i.e. mute all
other tracks) currently selected in the Part Selection listbox.