User's Manual

18 36ARB2 050505-36
VENT PIPE SEALANT
APPROVED
"HIGH TEMP."
SELF-ADHESIVE
ALUMINUM
TAPE
Fig. #23
VENT PIPE SEALANT
All outer joints of the vent pipe must be sealed with the ap-
proved "High Temp." self-adhesive aluminum tape provided.
Wrap the tape completely around the joint and press  rmly
in place.
VENT PIPE
INSULATION
Fig. #24
COVER (2 pcs.)
INSULATED COLLAR SHIELD
(Included Pt# TC36.9709)
After sealing the vent pipe an insulating blanket and cover
must be installed around the vent pipe,  ush with the top of
the unit and secured by  tting tabs through slots and bending
over tabs 180° as shown in  g #24. The parts required are
included. *NOTE: bending tabs to 90° away from arc bend
BEND
TABS
INSULATED COLLAR
SHIELD (Included) MUST
BE USED. SEE SECTION
BELOW