User manual

Phaesun GmbH · Brühlweg 9 · 87700 Memmingen · Germany · Telefon [phone] · [e-mail] · www.phaesun.com
1KW Wind/Solar Hybrid Controller User Manual
1KW Wind/Solar Hybrid Controller User Manual 1KW Wind/Solar Hybrid Controller User Manual
1KW Wind/Solar Hybrid Controller User Manual
Notices
NoticesNotices
Notices
1） Battery reverse
Battery reverseBattery reverse
Battery reverse-
--
-connection is forbidden.
connection is forbidden.connection is forbidden.
connection is forbidden.
2） Battery virtual connection or damage is one main factor of malfunction. Please check battery voltage and connection
status weekly, clear rust on positive, negative terminal in time; use lead terminal if available.
3） If the malfunction is not easy to eliminate or reason unclear, please write down the phenomenon in detailed record, and
contact manufacturer for help in time.
Installation Environment
Installation EnvironmentInstallation Environment
Installation Environment
1） The equipment should be installed indoor where is well-ventilated.
2） Avoid exposing the apparatus under direct sunshine, exposure, rain, moist, acid mist and dust.
3） Allow at least 20 inches (0.5 m) distance from battery.
4） Ambient Temperature is -20～+55℃; Ambient Humidity is 35～85%RH, no condensing.
5） Do not install the equipment in a compartment with flammable liquids, such as gasoline, or explosive vapors. Be ware
of the flame and the spark.
General Description
The wind/solar hybrid controller is an intelligent control device which can control wind turbine and solar panel at the same
time, specially designed for high-end wind/solar hybrid system and also suitable for wind/solar hybrid power system and
wind/solar hybrid monitoring system. It is used to control the wind generator and solar panel to charge the batteries safely
and efficiently.
With decent appearance, easy operation, visual LCD display and perfect protection functions, the apparatus has high charge
efficiency, low no-load loss.
The wind/solar hybrid controller is the core component of the off-grid power generation system. The performance of the
controller will impact the life and the stability of the whole system, especially the lifespan of battery banks.
1. Performance Description
Performance DescriptionPerformance Description
Performance Description
 Reliabili
ReliabiliReliabili
Reliability
tyty
ty：
：：
：Intelligentzed, modularized design, simple mechanism, powerful functions. With industrial range superior
components and strict production technology, the controller can be used in relatively bad working environment and has
reliable performance and long life-span.
 PWM Stepless Dump load Mode:
PWM Stepless Dump load Mode:PWM Stepless Dump load Mode:
PWM Stepless Dump load Mode: dump residual power with division into thousands of stages. It can dump residual power
while charging battery banks, which is benefit to effectively extend battery longevity.
 Voltage Limiting and Current Limiting Ch
Voltage Limiting and Current Limiting ChVoltage Limiting and Current Limiting Ch
Voltage Limiting and Current Limiting Charge Mode:
arge Mode: arge Mode:
arge Mode: When battery voltage exceeds the pre-set floating voltage point, the