USER’S MANUAL FULL VERSION 1
INTRODUCTION Congratulations on your purchase of the Phanteks Eclipse Series Case and welcome to the User’s Guide. Phanteks believes that meaningful designs are created through the fusion of form and function. CAUTION Please take a moment to carefully go through the installation guide. Phanteks will not take responsibility for any damages incurred due to incorrect installation and incorrect usage of this product. Thank you.
TABLE OF CONTENTS 1. SPECIFICATIONS 1. SPECIFICATIONS ................................................................................................................................................................................................................. 5 2. EXPLODED VIEW ................................................................................................................................................................................................................ 6 3.
2. EXPLODED VIEW 1. Chassis 2. Top Panel 3. SSD Brackets 4. Fans 5. Right Side Panel 6. Front Panel 7. HDD Tray 8. Hard Drive Cage 9. Front Mesh cover 10. Window Left Side Panel 11. Mid-plate Bracket 12. Rear Dust Filters 13. Top Covers + Filters (P400S models only) 14. Top Dust Filter (P400 model) 4 14 2 9 5 1 10 6 12 11 3 9 7 13 8 6 1. Châssis 2. Filtres de poussière inférieurs 3. Support SSD 4. Fans 5. Panneau latéral droit 6. Panneau frontal 7. Bacs HDD 8. Enclos du disque dur 9.
responsibility for any damages incurred due to incorrect installation and usage of this product. 4. I/O PORTS 3. ACCESSORIES 1. I / O P A N E L Top Dust Filters (P400S only) Filtre à poussière supérieur Filtro antipolvere superiore Filtro de pós superior Filtro de polvo superior Oberer Staubfilter Stof filter boven 5 3. Headphone 2. Microphone 8. HDD LED 1. USB 3.0 RGB LED Strip 300mm 5. Power Button 12 4. Reset/sw 7. FAN (Only in Model: P400S) *Located underneath top panel 6. LED * * * 1.
5. CONNECTIONS 6. PANEL REMOVAL AUDIO MIC2 L MIC2 R FRO-R F_IO_SEN FRO-L AGND AVCC MIC2_JD Power SW CAPTIVE THUMBSCREWS USB 3.0 PANEL Reset SW H.D.D LED LINE2_JD 1 ID IntA P1_D+ IntA P1_DGND IntA P1_SSTX+ IntA P1_SSTXGND IntA P1_SSRX+ IntA P1_SSRXVbus IntA P2_D+ IntA P2_DGND IntA P2_SSTX+ IntA P2_SSTXGND IntA P2_SSRX+ IntA P2_SSRXVbus No Pin (Power LED) RGB LED STRIP Connects Phanteks’ mulicolor LED strip for interior lighting.
6. PANEL REMOVAL 7. MOTHERBOARD INSTALLATION For the front panel, place your hands on the area shown and pull outward. Pour le panneau avant, placez vos mains sur la zone affichée, et tirez vers l’extérieur. Positionieren Sie auch bei der Frontblende Ihre Hände an der angezeigten Stelle und ziehen Sie sie dann nach außen. Per il pannello anteriore, posizionare le mani sull’area mostrata e tirare verso l’esterno. Para o painel frontal, coloque as mãos na área ilustrada e puxe para fora.
. POWER SUPPLY INSTALLATION 9. FILTERS REMOVAL To remove the bottom and front filter pull out. Mesh cover on top panel can also be cleaned. Pour retirer les filtres en bas et à l'avant, tirez dessus. La grille du panneau avant peut aussi être nettoyée. Ziehen Sie den unteren und vorderen Filter heraus. Die Gitterabdeckung an der oberen Blende kann ebenfalls gereinigt werden. Tirare verso l'esterno per rimuovere il filtro inferiore e anteriore.
11. HARD DRIVE INSTALLATION 10. FAN COMPATIBILITY 3.5” INSTALLATION FAN COMPATIBILITY TABLE 140mm 120mm Top 2 2 Front 2 3 Rear - 1 Place hard drive into tray and push in the arms to lock. Placez le disque dur dans le logement et poussez les bras pour le verrouiller. Bringen Sie die Festplatten im Fach an und drücken die Arme zum Verriegeln hinein. Collocare disco rigido nel cassetto e spingere i bracci verso l’interno per bloccare.
12. HARD DRIVE CAGE 13. DROP-N-LOCK SSD BRACKET HDD BRACKET REMOVAL SSD INSTALLATION To remove, unscrew the 4x screws on the midplate and the 4x screws on the bottom of the case. Para remover, solte os 4x parafusos na placa do meio e os 4x parafusos na parte inferior do gabinete. Zur Abnahme lösen Sie die 4 Schrauben an der mittleren Platte und die 4 Schrauben an der Unterseite des Gehäuses. Per la rimozione, svitare le 4 viti sulla piastra intermedia e le 4 viti sulla parte inferiore del case.
14. WATERCOOLING INSTALLATION 14.
15. OPTIONAL UPGRADES 3.5” HDD MODULAR BRACKET INSTALLATION (UP TO 4X EXTRA HDD’S) Step 1. Remove the HDD cover by removing the m3 Screw Step 2: Align the HDD bracket to the slot and drop in. Step 3: Screw in from the back with thumb screws to lock the bracket in place. Passo 1: Retire a tampa do HDD retirando o parafuso m3 Passo 2: Alinhe o suporte do HDD ao slot e solte-o. Passo 3: Parafuse da parte de trás com parafusos borboleta para travar o suporte no lugar.
16. SERVICES AND SUPPORT If you have any questions or concerns, please visit Phanteks’ website for technical support. We consider customer support, satisfaction and feedback an essential element of our overall marketing effort. Please feel free to contact our support team. Thank you! Contact Us at: www.phanteks.com www.phanteksusa.com www.phanteks.cn For Warranty Information, please visit Phanteks’ website.
