User guide

Replacing the Diopter Correction Lens

1. Press the Eyepiece Lock, which is located in a gap between the Eyepiece

and the Diopter Correction lens. (Turn the camera upside down to gain easy

access to it). Now remove the rubber Eyepiece by sliding it upwards

2. Remove the lens supplied with the nder by pulling it downward.

3. Remove the existing diopter by sliding downwards using the ngernail

groove and detach. Insert a new diopter by aligning it to the base of the

diopter holder and sliding it upwards into place. Finish by reattaching the

rubber eyecup.

Notice:

If there is dirt or dust on the lens surface,

remove it with a blower or sweep it o

gently with a lens brush

If there are ngerprints or dirt on the

lens surface, wipe them o with a piece

of clean, soft gauze

Using solvents could discolor the

discolor correction lens frame

2.16 Eyepiece Shutter

Close the eyepiece shutter when there is a strong light source behind the

camera or when pressing the shutter release button without looking through

the viewnder. (This prevents exposure error due to light entering from the

viewnder.)

Turn the eyepiece shutter lever in the direction of the arrow.