User guide

3.8 Drive Dial

Single-Frame Mode

One photograph is taken each time the shutter release button is pressed.

Set the shutter release mode selector to S.

Continuous Mode

Photographs are exposed as long as the shutter release button is pressed.

Set the shutter release mode selector lever to C. Photographs are taken

continuously at a rate depending on the buer speed of the digital back

mounted on the camera.

Mirror Up Mode

When the shutter button is pressed, the mirror moves up, and when the

shutter button is pressed again, the shutter is tripped and a picture is taken.

Self-Timer Mode

In this mode, the shutter will be released 10 seconds after the shutter release

button is pressed.

Activate the self-timer by pressing the button. Next, rotate the front dial

so that On is displayed in the camera’s LCD and press the shutter release.

When the shutter release is pressed, the self timer lamp will blink continuously

for 7 seconds, followed by 3 seconds of rapid blinking until the camera

releases the shutter.

M.UP