Speaker User Manual

T E C H N O L O G Y

Custom Installation Series

Owners Manual / Installation Instructions

Power FL-8 Power FL-10 Power FL-12

CI-15

MSE Audio Group 8650 College Boulevard Overland Park, Kansas 66210 (888) PHASE-TK

www.mseaudio.com www.phasetech.com

Box contents

1 Speaker

1 Grille

1 Paint mask

1 Cutout hole template

1 Euroblock connector

Pre-construction bracket (sold separately)

SpeedWing™ mounting arms

Grille safety clip

Euroblock connector

Grille

Paint mask

PAGE 1
R T E C H N O L O G Y Custom Installation Series Owners Manual / Installation Instructions Power FL-8 CI-15 Power FL-10 Power FL-12 Box contents 1 1 1 1 1 Speaker Grille Paint mask Cutout hole template Euroblock connector Pre-construction bracket (sold separately) SpeedWing™ mounting arms Grille safety clip Euroblock connector Grille Paint mask MSE Audio Group 8650 College Boulevard Overland Park, Kansas 66210 www.mseaudio.com www.phasetech.
PAGE 2
R T E C H N O L O G Y Installation Instructions: Installing the CI-15 in an Existing Wall 1. Unpack speaker. Leave paint mask in place until after speaker is installed or painting is complete. 2. Use provided cutout template to mark hole. Use RotoZip or other tool to cut hole in wall. Hole size: 4 in. (102 mm) tall x 4 in. (102 mm) wide. 3. Connect Euroblock to speaker wires, and connect to speakers. 4.
PAGE 3
R T E C H N O L O G Y Installation Instructions: Installing the CI-15 Using the Pre-Construction Bracket 1. Nail or screw bracket to studs. 2. Finish installing wall. 3. Use RotoZip or other tool to cut hole. 4. Unpack speaker. Leave paint mask in place until after speaker is installed or painting is complete. 5. Connect Euroblock to speaker wires, and connect to speakers. 6.