P-200 HIGH CURRENT MULTI-APPLICATION SUBWOOFER/MONO-BLOCK POWER AMPLIFIER USER’S GUIDE
SAFETY INSTRUCTIONS CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel. • Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of un-insulated “ dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
• • Rugged design that fits in a single rack space with thermostatically controlled cooling fan Designed to operate efficiently into 4 ohm speaker loads OPERATING INSTRUCTIONS AND CONTROLS FRONT PANEL 1 2 3 4 5 6 1. Power on-off switch, master power control 2. Indicator LEDs: Power LED, red indicator light for main power on Dual color LED: Red Standby-mute, Green Auto-on 3. Volume input level adjustment. This control is used for level matching of the subwoofer system to the main loudspeakers.
• 4. 5. 6. 7. 8. 9. FULL RANGE: This switch position transforms the P200 amplifier in to a high performance 20Hz-20kHz, 200-watt mono-block power amplifier. With the switch in this position the front panel Crossover control and the rear panel Low Frequency Equalization control do not function. LINE IN connectors are a set of dual RCA type plugs that accept an input signal from the subwoofer or main signal outputs from your home theater receiver or control center.