Stereo Amplifier User Manual

2
SAFETY INSTRUCTIONS
CAUTION: To reduce the risk of electric shock, do not
remove cover (or back). No user-serviceable parts
inside. Refer servicing to qualified service personnel.
• Explanation of Graphical Symbols
1. Read Instructions - All the safety and operating
instructions should be read before the appliance is
operated.
2. Retain Instructions - The safety and operating
instructions should be retained for future reference.
3. Heed Warnings - All warnings on the appliance and
in the operating instructions should be adhered to.
4. Follow Instructions - All operating and other
instructions should be followed.
5. Water and Moisture - The appliance should not be
used near water - for example, near a bathtub,
washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool, etc.
6. Carts and Stands - The appliance should be used
only with a cart or stand that is recommended by the
manufacturer.
PORTABLE CART
WARNING
7. Wall or Ceiling Mounting - The appliance should be
mounted to a wall or ceiling only as recommended by
the manufacturer.
8. Ventilation - The appliance should be situated so
that its location or position does not interfere with
its proper ventilation. For example, the appliance
should not be situated on a bed, sofa, rug, or
similar surface that may block the ventilation
openings; or placed in a built-in installation,
such as a bookcase or cabinet that may impede the
flow of air through the ventilation openings.
9. Heat - The appliance should be situated away from
heat sources such as radiators, stoves, or other
appliances that produce heat.
10. Power Source - The appliance should be connected
to a power supply only of the type described in the
operating instructions or as marked on the appliance.
11. Power-Cord Protection - Power-supply cords should
be routed so that they are not likely to be walked on
or pinched by items placed upon or against them,
paying particular attention
to cords at plugs, convenience receptacles, and the
point where they exit from the appliance.
12. Cleaning - The appliance should be cleaned only
as recommended by the manufacturer.
13. Nonuse Periods - The power cord of the appliance
should be unplugged from the outlet when left unused
for a long period of time.
14. Object and Liquid Entry - Care should be taken so
that objects do not fall into and liquids not spilled
into the inside of the appliance.
15. Damage Requiring Service - The appliance should
be serviced by qualified service personnel when:
a. The power-supply cord or the plug has been
damaged; or
b. Objects have fallen onto, or liquid has been
spilled into the appliance; or
c. The appliance has been exposed to rain; or
d. The appliance does not appear to operate normally
or exhibits a marked change in performance; or
e. The appliance has been dropped, or the cabinet
damaged.
16. Servicing - The user should not attempt to
service the appliance beyond those means described in
the operating instructions.
All other servicing should be referred to qualified
service personnel.
17. Grounding or Polarization - The precautions that
should be taken so that the grounding or polarization
means of an appliance is not defeated.
APPLICABLE FOR USA, CANADA OR WHERE
APPROVED FOR USAGE
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE PLUG TO WIDE SLOT, INSERT FULLY.
ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES,
INTRODUIRE LA LAME LA PLUS LARGE DE
LA FICHE DANS LA BORNE CORRESPONDANTE DE
LA PRISE ET POUSSER JUSQU AU FOND.
INTRODUCTION
Thank you for your purchase of the Phase Technology P200 amplifier. This versatile amplifier is designed to provide years of
reliable service and listening pleasure. The P200 is the companion amplifier to the Phase Technology IW-100 and IW-200 in-
wall subwoofer systems but its use is not limited to only subwoofer applications. The P200 also provides you with the
flexibility of operation as a full range high current, high performance, mono-block audio power amplifier.
As a subwoofer amplifier the P200 incorporates many features that provide operational and installation flexibility.
• Variable input level control
• Variable low pass crossover at 24 dB/octave
• Phase control
• Variable low frequency equalization for room placement optimization
• Switchable input circuitry for Subwoofer, LFE or Full Range applications
• Auto-signal sensing for automatic amplifier turn on
• 12V auto turn-on for use with home remote control applications
• High current/high capacity power supply
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert you to the presence of un-insulated
“ dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to
persons
.
The exclamation point within an equilateral
triangle is intended to alert you to the
presence of important operating and maintenance
(servicing) instructions in
the literature accompanying the appliance
.