Surface-Mount Speaker Specifications Sheet

ManualsBrandsPhase Technology ManualsPortable SpeakersSurface-Mount Speaker SM590i

Specifications: SM590i

System Type

Frequency Response (- 3 dB)

Low Frequnecy (-10 dB)

Max. Program Power

Max. Continuous Power RMS

Max. SPL dB @ 1 M

Sensitivity dB @ 1W/1M

Impedance (nominal)

Coverage Angle (-6 dB @ 500 Hz)

Coverage Angle (-6 dB @ 4 kHz)

Directivity Factor (Q)

Directivity Index (DI)

Tap Selector

Transformer Taps

Transducers

Low Frequency Driver

High Frequency Driver

Low Frequency Voice Coil

Crossover Frequency

Network Type

Low Pass

High Pass

Enclosure Material

Motor Board

Grille

Inputs

Colors

Length

Height

Width (including bracket)

Weight

Shipping Weight

Accessories

Included

Optional

Packaging

5.25” Coax, open-ceiling, ported (33 Watt transformer for

25/70.7/100 Volt or voice coil / 8 Ohm direct)

71 Hz - 22 kHz

61 Hz - 20 kHz

160 Watts

80 Watts

108.5 dB

89.5 dB

8 Ohm (nominal value)

166º (average)

88º (average)

5.69 (Averaged 100 Hz - 10 kHz); 5.87 @ 2 kHz

6.12 dB (Averaged 100 Hz - 10 kHz); 7.69 dB @ 2 kHz

6-Position rotary switch with voice coil direct (8 Ohm)

1 x 133 mm (5.25 in) Polypropylene cone, butyl rubber surround

25 mm (1.0 in) Convex aluminum horn-loaded tweeter

25 mm (1.0 in)

3 kHz

N/A

12 dB per octave, 2nd order

Drawn aluminum backcan with ABS baffle

Cast aluminum

Iridite-plated steel with powder-coat finish

4 Pin, 5 mm Euroblock for individual or daisy chain connection

Black or white

305.1 mm / 12.01 in

316.9 mm / 12.48 in

216.6mm / 8.53 in

4.3 kG / 9.5 lbs

10 kG / 22.0 lbs (2 per box)

Hanging hardware, Euroblock connector & terminal

weather boot

U-Mount Bracket (AC-SM-UB5), Pole Mount Adaptor

(AC-SM-PMA5), Bent Shaft (AC-SM-BS5)

2 Per box, can ship as single

Key Features

• High-power output (108.5 dB) for longer

throw and higher SPL requirements.

• One 133 mm (5.25 in) polypropylene

woofer and one 25 mm (1.0 in) horn-

loaded convex aluminum dome tweeter

mounted to a proprietary cast-alumi-

num HP5

baffle & heat sink.

• 89.5 dB Average sensitivity offers high

output capabilities and reduced amplifi-

cation costs.

• Weatherized components for indoor/

outdoor applications. Includes a

tool-free SpeedLever

captured ball

mounting system for a fast & secure

installation.

• Included accessories: Mounting hard-

ware, Euroblock connector & terminal

weather boot.

• Vertical and horizontal pivoting offer

precision aiming for indoor & outdoor

applications.

• Easy access 6-position selectable tap

switch for 25, 70.7 & 100 Volt applica-

tions with voice coil/8 Ohm direct sim-

plifies ordering and inventory tracking.

• Optional accessories: Pole-Mount Adap

tor, Bent Shaft, U-Bracket.

• High quality black or white paint finish.

Description

The SM590i is a high-powered 5.25”

2-way horn-loaded loudspeaker in a ported

surface-mount enclosure design. The SM590i

incorporates a low-profile grille, proprietary

HP5

motor-board and 6-position tap

switch with voice coil/8 Ohm direct. Hang

ing hardware is included and features a

fast-action Speed-Lever

for easy and secure

installation with a proprietary captured ball

mounting system. Optional accessories

include a pole mount adaptor, a bent shaft

and a u-bracket.

Applications

Engineered for high-SPL and effective

low-end response (61 Hz @ - 10 dB), the

SM590i delivers consistent high-perfor

mance music and paging for applications

requiring longer throw or higher volume

above the existing ambient noise level.

The SM590i is ideal for suface-mount

sound reinforcement/PA in applications

with high ambient noise levels including

casinos, warehouses, airports, transporta

SM590i

Surface-Mount Speaker

Preliminary Technical Information for System Engineers

Mounting hardware included

Frequency response is measured in half space and includes a low-frequency peak > + 3 dB.

Continuous power rating, EIA-426-B test.

2.83 Volts at a distance of 1 meter.

SoundTube continually develops new product innovations and improvements. Updates to existing

products without prior notice are an example of SoundTube’s drive for constant improvement.

70.7 V Output 100 V Output 25 V Output

33 W 104.5 dB 33 W 104.5 dB 5 W 96.5 dB

17 W 102 dB 17 W 102 dB 2.5 W 93.5 dB

9 W 99 dB 9 W 99 dB 1.3 W 90.5 dB

6 W 97.5 dB 6 W 97.5 dB 0.63 W 87.5 dB

3 W 97.5 dB

Summary of content (4 pages)

PAGE 1
SM590i Surface-Mount Speaker Preliminary Technical Information for System Engineers Key Features Mounting hardware included Specifications: SM590i System Type 5.25” Coax, open-ceiling, ported (33 Watt transformer for 25/70.7/100 Volt or voice coil / 8 Ohm direct) Frequency Response (- 3 dB)1 Low Frequnecy (-10 dB)1 Max. Program Power Max. Continuous Power RMS2 Max.
PAGE 2
SM590i Surface-Mount Speaker Preliminary Technical Information for System Engineers tion & shipping centers, schools, gyms, arenas and stadiums. For additional bass down to 40 Hz (-10 dB) the RS801i subwoofer may be used. Frequency Response �� Patented SoundTube Technologies SoundTube Entertainment is consistently developing new technologies that enhance audio product performance. SoundTube Entertainment innovations are protected by multiple U.S.
PAGE 3
SM590i Surface-Mount Speaker Preliminary Technical Information for System Engineers Data Acquisition All performance data acquired at SoundTube’s Technical Measurement Center (TMC) are analyzed using a variety of standard measurement techniques, including Measured Length Sequence (MLS) and Time Delay Spectrometry (TDS). Performance, development and data acquisition tools include: Gold Line TEF 20, CLIO, LMS, LEAP, and proprietary modeling software.
PAGE 4
SM590i Surface-Mount Speaker Preliminary Technical Information for System Engineers SoundTube Entertainment Mechanical Drawings 6430 North Business Park Loop Park City, Utah 84098 Phone 435.647.9555 Fax 435.647.9666 Toll Free 800.647.TUBE www.soundtube.com 216.6 mm (8.53 in) All SoundTube products come with a 5-year limited warranty. 316.9 mm (12.48 in) 305.1 mm (12.