Home Theater System User Manual

ManualsBrandsPhase Technology ManualsHome Theater SystemWL-RX SUB

Wireless Subwoofer Receiver

Wireless Transmitter

Owners Manual / Installation Instructions

WL-RX SUB · WL-3TX

TE CH NO LO GY

DESCRIPTION

The WL-RX SUB receiver works with the WL-3TX wireless transmitter to make any powered

subwoofer with a line level input into a wireless sub. This transmitter and receiver

combination will accurately reproduce low-frequency sounds and music without interference

or compression over distances up to 150 feet. The receiver’s compact size allows for easy

and clean installation with almost any powered subwoofer. Multiple subs can be used in a

single system (by adding receivers), and multiple systems can be used in the same home or

building (by using 1-3 transmitters set to different channels).

Please note: While the effective range of the WL-3TX and WL-RX SUB is normally greater

than 150 feet, the range distance can be signicantly affected by walls, ceilings, and other

obstacles. Phase Technology recommends using the transmitter and receiver in either the

same or adjacent rooms for best results.

CONTENTS:

SAFETY PRECAUTIONS 2

WL-RX SUB INSTALLATION/SETUP 3

WL-3TX INSTALLATION/SETUP 3

MULTIPLE SUBWOOFERS 3

TROUBLESHOOTING 3

SPECIFICATIONS 4

WARRANTY 4

WL-RX SUB FEATURES:

•Designed for use with the PHASE TECHNOLOGY WL-3TX wireless multi-channel

transmitter

•Usable with most powered subwoofer

•Signal sensing auto link-up indicator

•Selectable wireless 3-channel operation

•Interference free 2.4 GHz operation

•Long range operation

•Wireless uncompressed audio streaming

•Line level subwoofer output connection

•Allows multiple receiver/subwoofer operation from one transmitter

•Allows up to 3 different systems to operate independently.

Phase Technology 8650 College Boulevard

Overland Park, Kansas 66210 (866) 663-9770

www.phasetech.com

An MSE Audio Group company www.mseaudio.com

WL-RX SUB

WL-3TX

(Optional)

Summary of content (4 pages)

PAGE 1
R T E C H N O L O G Y Wireless Subwoofer Receiver Wireless Transmitter Owners Manual / Installation Instructions WL-RX SUB · WL-3TX WL-RX SUB WL-3TX (Optional) DESCRIPTION The WL-RX SUB receiver works with the WL-3TX wireless transmitter to make any powered subwoofer with a line level input into a wireless sub. This transmitter and receiver combination will accurately reproduce low-frequency sounds and music without interference or compression over distances up to 150 feet.
PAGE 2
SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ! CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.
PAGE 3
WL-RX SUB INSTALLATION/SETUP 1. Make sure your subwoofer is turned off to avoid any possible damage. 2. The WL-RX SUB receiver includes a universal adaptor designed to operate on household power of 100-240V and 50/60 Hz. Plug the power adapter into a convenient power outlet and the small coaxial DC power plug into the transmitter socket labeled “DC In +5V”. The receiver should power up and display a red LED light on the front of the unit. 3.
PAGE 4
o Turn off or relocate any equipment that might be operating on the 2.4 GHz band. o Check the distance between the transmitter and receiver and move closer if possible. The audio cables can be extended if necessary for better placement positioning. o Building construction or large metal objects can reduce the strength of the radio signals. Concrete and steel do not pass radio waves well. Try relocating the receiver or transmitter to improve the signal strength.