CD-RECEIVER XXV-01D INSTRUCTION MANUAL Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your KENWOOD dealer for information or service on the product.
Contents Safety precautions 4 Notes 5 Warning 6 About CDs 7 About AAC, MP3 and WMA 8 Notes on Multi-function System 9 General features 10 Power Selecting the Source Volume Attenuator Audio Control Audio Setup Subwoofer Output Sound Field Control Sound Management system Equalizer Control WOW Control Bypass Control Memory mode Memory Recall mode Theft Deterrent Faceplate Faceplate Angle Adjustment Display Type Selection Graphic part/ Spectrum Analyzer Display Switching Wallpaper selecting Text S
Menu system Menu System Security Code Touch Sensor Tone Manual Clock Adjustment Date Adjustment Date Mode Synchronize Clock DSI (Disabled System Indicator) Selectable Illumination Dimmer Contrast Adjustment Display-reversing Setting Built-in Amp Setting G-Counter Level set G-Analyzer Reset G-Analyzer Calibration setup G-Analyzer Stop Watch Dual Zone System Setting B.M.S. (Bass Management System) B.M.S.
Safety precautions 2WARNING To prevent injury or fire, take the following precautions: • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. • Never watch the G-Analyzer Display screen when you are driving. Otherwise, a car accident may result. 2CAUTION To prevent damage to the machine, take the following precautions: • Make sure to ground the unit to a negative 12V DC power supply.
Notes • If you experience problems during installation, consult your Kenwood dealer. • If the unit fails to operate properly, press the Reset button to restore factory settings. • Press the reset button if the disc auto changer fails to operate correctly. Normal operation should be restored. Reset button • We recommend the use of (page 44) to prevent theft. • The characters conforming to ISO 8859-1 character set can be displayed.
Notes 2Warning About "Media Manager" of PC application 2CAUTION • "Media Manager" is recorded in the CD-ROM attached to this unit. • Refer to the attached installation manual for the installation method of "Media Manager". • Refer to the user’s manual recorded in the installation CD-ROM and Help of "Media Manager" for the operation method of "Media Manager". • The unit can play CD (hereafter called "ACDrive disc") created by "Media Manager".
About CDs Handling CDs Removing CDs • Do not touch the recording surface of the CD. When removing CDs from this unit pull them out horizontally. CDs that cannot be used • CDs that are nott round cannot be used. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Do not stick tape etc. on the CD, or use a CD with tape stuck on it.
About AAC, MP3 and WMA The playable AAC/MP3/WMA file (hereafter called Audio file) and the media format has the following limitation. The Audio file, which is not comforming to the specification, may not play normally, or the file and folder names may not display correctly. • Attach the correct extension for the Audio file (AAC: ".M4A", MP3: ".MP3", WMA: ".WMA") • Do not attach the extensions to files other than the Audio file.
Notes on Multi-function System What is the Multi-function System? Multi-function System shows the Multi-function display, allowing you to select various functions and settings. Functions available for the current source are displayed. Operational 1 Press the [NEXT] button to Show the Multifunction display Each time you press the [NEXT] button, the Multi-function display is switched among the Source Function display, System Function display, and blank display.
General features NEXT/MENU ATT Release button VOL ANG AUTO S.F.C S.M.S EQ SRS WOW DSP Display SRC Control knob Tuner FM1-1ch 107.7 MHz 01-Jan-05 Sat ATT indicator Power • The DAB tuner and the HD Radio tuner must be connected one at a time. Turning ON the Power Press the [SRC] button. Turning OFF the Power Press the [SRC] button for at least 1 second. Volume Selecting the Source Increasing Volume Turn the [VOL] knob clockwise. Press the [SRC] button.
Audio Control 1 Select the source to adjust Press the [SRC] button. 2 Enter Audio Control mode 4 Setup the Audio item Turn the [VOL] knob. Adjustment Item Volume offset Dual Zone System Display Range "VOLUME OFFSET" –8 — 0 "2ZONE" ON/OFF Press the [VOL] knob. 3 Select the Audio item to adjust Press the [VOL] knob. Each time you press the knob, the item to be adjusted alternates between the items shown in the table below. 4 Adjust the Audio item Turn the [VOL] knob.
General features Subwoofer Output Turning the Subwoofer output ON or OFF. Hold down on [AM] of the Control knob for at least 1 second. Each time you press the button, Subwoofer output switches ON and OFF. When it is ON, "SUBWOOFER ON" is displayed. • You can control this function when "2ZONE" of
DTA Front/DTA Rear DTA Subwoofer Position Setting 0 — 20.33 (feet) Front-Left/ Front-Right/ Front/ ALL • When the "2ZONE" of
General features Equalizer Control 1 Select the source to adjust Top 40 Jazz "Top40" "Jazz" Press the [SRC] button. 2 Show the Multi-function display Press the [NEXT] button repeatedly until "EQ" appears. Refer to (page 9). 3 Enter Equalizer Control mode Turn the [VOL] knob to select "EQ". Press the [VOL] knob. • When "2ZONE" of
• To get the best sound, first set the Cabin Setting and Speaker Select Front/Rear parameters using the (page 13). 6 Exit Equalizer Control mode WOW Control Item Effect FOCUS TruBass Front TruBass Rear SRS 3D Range Middle/High/User/Through/Low OFF/1 — 9 OFF/1 — 4 OFF/1 — 4 OFF/1 — 4 Turn the [VOL] knob to select "Return". Press the [VOL] knob. • Effect: TruBass, FOCUS and SRS 3D are all set to values shown in the table below.
General features Bypass Control Temorarily bypassing DSP (Digital Signal Processor) System. 1 Select the source to adjust Press the [SRC] button. 2 Show the Multi-function display Press the [NEXT] button repeatedly until "DSP" appears. Refer to (page 9). 3 Enter Bypass Control mode Turn the [VOL] knob to select "DSP". Press the [VOL] knob. 4 Put in the memory Turn the [VOL] knob to select "Memory1" or "Memory2". Press the [VOL] knob for at least 2 seconds.
"Recall1": Recall the value put in "Memory1" by (page 16). "Recall2": Recall the value put in "Memory2" by (page 16). 2 Push the faceplate in until it clicks. The faceplate is locked in place, allowing you to use the unit. 7 Exit Memory Recall mode Turn the [VOL] knob to select "Return". Press the [VOL] knob. Theft Deterrent Faceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the Faceplate Press the Release button.
General features 8 Graphic display part 9 G-Analyzer display part Display Type Selection Changing the display mode. 5 Exit display control mode 1 Show the Multi-function display Press the [NEXT] button repeatedly until "Display" appears. Refer to (page 9). 2 Enter display control mode Turn the [VOL] knob to select "Display". Press the [VOL] knob. 3 Select the display mode Turn the [VOL] knob to select "Mode". Press the [VOL] knob.
6 Select the graphic/ spectrum analyzer display part display Push the Control knob towards [4] or [¢]. Each time you press the button, the graphic display/ spectrum analyzer display alternates between the displays shown in the table below. 3 Exit Display Control mode Turn the [VOL] knob to select "Return". Press the [VOL] knob. … Graphic display/ Spectrum Analyzer display Movie 1 Movie 2 Movie 3 (Movie 1 and Movie 2) Spectrum analyzer 1 2 Select the wallpaper. Push the Control knob towards [FM] or [AM].
General features Display Type B In Audio file source Text Selection for Display Selecting the text display. 1 Show the Multi-function display Press the [NEXT] button repeatedly until "Display" appears. Refer to (page 9). 2 Enter display control mode 3 Select the display mode Turn the [VOL] knob to select "Mode". Press the [VOL] knob. 4 Select the display Type Push the Control knob towards [4] or [¢]. Select the "Display Type B" display.
In Auxiliary input source Information Auxiliary input name Clock Date Display "AUX Name"/ "AUX EXT" "Clock" "Date" In Standby mode Information Source name Clock Date Display "Standby" "Clock" "Date" 7 Exit Display Control mode Turn the [VOL] knob to select "Return". Press the [VOL] knob. • Auxiliary input name is displayed for the Auxiliary input source. • * If the contents of the information cannot be displayed, Play time or Frequency is displayed.
General features 3 3rd text display part 4 4th text display part 5 Indicator display part 6 Icon display part Display Type C/ Display Type D Text Display Switching Changing the text display. 1 Show the Multi-function display Press the [NEXT] button repeatedly until "Display" appears. Refer to (page 9). 2 Enter display control mode Turn the [VOL] knob to select "Display". Press the [VOL] knob. 3 Select the display mode Turn the [VOL] knob to select "Mode".
Information (34) Radio text (FM) Station name or Program Service name Spectrum Analyzer & Clock Date No display Display "Radio Text"* "SNPS"*¹ "Speana/Clock" "Date" "Blank" In CD & External disc source Information (12) Source name Track number & Play time Information (34) Disc title Track title Disc name Spectrum Analyzer & Clock Date No display Display "Disc Title"* "Track Title"* "DNPS"*¹ "Speana/Clock" "Date" "Blank" Information (34) Spectrum Analyzer & Clock Date No display Display "Speana/Clock" "
General features Texts displayed on Display Type C/D display in 4-item displayb mode In Tuner source Information Station name or Program Service name Radio text or Program Service name (FM) Radio text (FM) Station name or Program Service name Frequency Indicator Spectrum Analyzer & Clock Date No display Display "BAND+ch+SNPS"* Condition 1 "Radio Text"* 1 "Radio Text"* "SNPS"*¹ "BAND+ch+FREQ" "Indicator" "Speana/Clock" "Date" "Blank" 234 234 1 1234 1234 1234 234 In CD & External disc source Informatio
Texts displayed on Display Type C/D in 1-item 4-rowc mode Display Type C In Tuner source Information Radio text or Program Service name (FM) • For the SIRIUS tuner source, information is displayed in the 2-item display mode.
General features • During album art downloading, "Down-loading" is displayed. Downloading requires a maximum of 30 seconds. Display Type D Icon Display Switching Changing the Icon Display6. 1 Show the Multi-function display Press the [NEXT] button repeatedly until "Display" appears. Refer to (page 9). Turn the [VOL] knob to select "Display". Press the [VOL] knob. 3 Select the display mode Turn the [VOL] knob to select "Mode". Press the [VOL] knob.
7 Exit display control mode G-Analyzer display Turn the [VOL] knob to select "Return". Press the [VOL] knob. • When you selected the Display Type B display, select an easy viewable font color. • The "Indicator" item of Display type C/D can be set; however, the actual display color does not change. • This function can be set for each display type. • When the SIRIUS tuner source in the 1-item 4-rowc mode of Display type C/D, the same color is set for both the upper and lower rows.
General features Station/Disc Naming (SNPS/DNPS) 9 Exit Menu mode Press the [MENU] button. Attaching a title to a Station or CD. 1 Receive/play the station/disc you want to attach a title to • A title cannot be attached to MD or Audio file media. 2 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 3 Select Name set mode • When operation stops for 10 seconds the name at that time is registered, and Menu mode closes.
Tuner features NEXT VOL AUTO/AME SRC Band display 1 2 3 4 5 6 Control knob Frequency display Tuner FM1-1ch 107.7 MHz SNPS Preset station number ST indicator Tuning Tuning Mode Selecting the station. Choose the tuning mode. 1 Select tuner source Press the [SRC] button. Select the "TUNER" display. 2 Select the band Push the Control knob towards [FM] or [AM]. Each time you push the knob toward [FM], it switches between the FM1, FM2, and FM3 bands.
Tuner features Function of remote control Direct Access Tuning Auto Memory Entry Entering the frequency and tuning. Putting stations with good reception in the memory automatically. 1 Select the band 1 Select the band for Auto Memory Entry Press the [FM] or [AM] button. 2 Enter Direct Access Tuning mode Press the [DIRECT] button on the remote control. "– – – –" is displayed. Push the Control knob towards [FM] or [AM]. 2 Open Auto Memory Entry Press the [AME] button for at least 2 seconds.
RDS features NEXT VOL AUTO 1 2 3 4 5 6 SRC Control knob Tuner FM1-1ch 107.7 MHz SNPS Radio Text Radio text Radio Text Scroll Registration of a station as a PTY Scrolling the displayed radio text. Registering a Program Type for stations with no PTY data. Hold down on [FM] of the Control knob for at least 1 second. 1 Receive the station you want to register 2 Select the Program Type to register Refer to (page 32).
RDS features PTY (Program Type) 3 Search for the selected Program Type Selecting the Program Type and searching for a station. 1 Enter PTY mode Press the Control knob. "PTY Select" is displayed. • The PTY function cannot be used during a traffic bulletin or AM reception. 2 Select the Program Type station Push the Control knob towards [4] or [¢]. When you want to search for other stations, push toward [4] or [¢] of the Control knob again. • When selected Program Type is not found, "No PTY" is displayed.
CD/Audio file/External disc control features 0 VOL NEXT SRC Control knob IN indicator Folder number S.Mode Scan Random Repeat F.SEL Play mode indicator Compact Disc PLY F-02 T-01 10 : 00 Album/Artist Title Track number Playing CD & Audio file When there is no disc inserted 1 Open the panel. Press the [0] button. 2 Insert a disc. • When the faceplate slides open, it might interfere with the shift lever or other vehicle function.
CD/Audio file/External disc control features Playing External Disc Playing discs set in the optional accessory disc player connected to this unit. Press the [SRC] button. Select the display for the disc player you want. Display examples: Display "CD Changer" "MD Changer" Disc player CD changer MD changer Pause and play Press the Control knob. Each time you press the knob, the audio pauses or plays.
Track/File/Disc/Folder Repeat Random Play Replaying the song, disc in the Disc changer or Audio file folder you are listening to. Play all the songs on the disc or Audio file folder in random order. 1 Show the Multi-function display 1 Show the Multi-function display Press the [NEXT] button repeatedly until "Repeat" appears. Refer to (page 9). 2 Turn ON/OFF the Repeat Play Turn the [VOL] knob to select "Repeat". Press the [VOL] knob.
CD/Audio file/External disc control features Function of Audio file Disc Random Play Playing randomly from all of the Audio files recorded in the disc. Folder number display Displays the number in the folder belonging to the currently selected folder. Folder 2 1 Show the Multi-function display Press the [NEXT] button repeatedly until "Random" appears. Refer to (page 9). 2 Turn ON the Disc Random Play Turn the [VOL] knob to select "Random".
Function of ACDrive disc Switching the Play mode Arrange the playing orders of the songs by categories. 1 Show the Multi-function display Press the [NEXT] button repeatedly until "S.Mode" appears. Refer to (page 9). 2 Select the Play mode Turn the [VOL] knob to select "S.Mode". Press the [VOL] knob. Each time you press the button, the Play mode alternates between the modes shown on the table below. The Play mode indicator is ON.
SIRIUS tuner control features NEXT VOL AUTO SRC Band display 1 2 3 4 5 6 Control knob Channel number SIRIUS SR1-1ch CH-200 Channel Name Category Name Preset station number Select SIRIUS Satellite Radio Mode Switching Seek Mode Selecting the SIRIUS Satellite Radio Tuner (optional accessory) connected to this unit. Sets the seeking mode. Selecting SIRIUS Mode Press the [SRC] button. Select the "SIRIUS" display. • You need to subscribe to SIRIUS to receive the service by SIRIUS Satellite Radio.
Category and Channel Search Selecting the channel and category you want to receive. 1 Enter Category and Channel Search mode Press the Control knob. • It takes several seconds until categories appear. 2 Select the Category Push the Control knob towards [FM] or [AM]. Show the category you want to select in the second row. In the first and third rows, show the categories preceding and following the category you want to select. 3 Select the Channel Push the Control knob towards [4] or [¢].
SIRIUS tuner control features Channel Preset Memory Preset Tuning Putting the channel in the memory. Recalling the channels in the memory. 1 Select the preset band 1 Select the preset band Push the Control knob toward [FM]. 2 Select the channel to put in the memory Push the Control knob towards [4] or [¢]. 3 Show the Multi-function display Press the [NEXT] button repeatedly until "1" — "6" appears. Refer to (page 9).
HD Radio control features SRC Band display 1 2 3 4 5 6 Control knob Frequency display HD Radio HF1-1ch 107.7 MHz Station Name Title Preset station number ST indicator Tuning • When you connect an HD Radio, Tuner features of the unit are disabled and changed to HD Radio tuner features. A portion of the setting methods including the Tuning Mode will change.
DAB tuner control features NEXT VOL AUTO SRC Control knob Frequency display Band display 1 2 3 4 5 6 ST indicator DAB DB1-1ch 1472.000MHz Service Label Dynamic Label Preset station number About DAB Tuner control Refer to A* * * * group on the Instruction manual of DAB Tuner KTC-9090DAB (optional accessory) for the control method of DAB Tuner function.
4 Recall the service Press the [VOL] knob. Program Type (PTY) Function This function permits desired program types from within the received Ensemble to be searched and monitored. 1 Enter PTY Mode Press the Control knob. "PTY Select" is displayed. • This function cannot be used during the interruption of the announcement/ PTY Watch. 2 Select the program type Push the Control knob towards [FM] or [AM]. Each time you push the knob, the program type changes.
Menu system VOL MENU Menu System Setting beep sound during operation, etc. functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 2 Select the menu item Push the Control knob towards [4] or [¢]. Example: When you want to set the beep sound select the "Beep" display.
• When you activate the Security Code function, the code cannot be changed and the function cannot be released. Note, you can set the Security Code with a 4 digit number of your choice. 1 Enter Standby Press the [SRC] button. Select the "STANDBY" display. 2 Enter Menu mode Press the [MENU] button for at least 1 second. When "MENU" is displayed, "Security" is also displayed. 3 Enter Security Code mode Press the Control knob for at least 1 second. When "Enter" is displayed, "CODE" is also displayed.
Menu system In Standby mode In Standby mode Date Adjustment Synchronize Clock 1 Select Date Adjust mode Synchronizing the RDS station time data and this unit’s clock. Push the Control knob towards [4] or [¢]. Select the "Date Adjust" display. 2 Enter Date Adjust mode Display "SYNC: OFF" "SYNC: ON" Setting Adjust the time manually. Synchronizes the time. Press the Control knob for at least 1 second. The date display blinks.
In Standby mode In Standby mode Contrast Adjustment G-Counter Level set Adjusting the display contrast. Calibrating G-Point. Setting the level according to the kinds of vehicles. "Contrast: 4" (Original setting) In Standby mode Display-reversing Setting If no operation is performed for a predetermined period of time, switching between negative and positive display modes takes place automatically. Display-reversing maintains the initial brightness of the display for a long period of time.
Menu system In Standby mode G-Analyzer Calibration setup G-Analyzer requires calibration for horizontal acceleration and braking. Select the "Stop Watch" display. 2 Enter G-Analyzer Stop Watch mode Press the Control knob for at least 1 second. "Stop" is displayed. 3 Enter Counter Ready mode • Detection of horizontal and straight directions should be done at horizontal location going straight.
Display "Zone2: Rear" "Zone2: Front" Setting Sub source (Auxiliary input source) is to be rear channel. Sub source (Auxiliary input source) is to be front channel. 2 Enter AMP Control mode Press the Control knob for at least 1 second. 3 Select the AMP Control item for adjustment Push the Control knob towards [FM] or [AM]. • For the details on the AMP Control item, see the Instruction manual attached to the LX AMP. Other than Standby mode B.M.S.
Menu system In FM reception CRSC (Clean Reception System Circuit) Temporarily have reception alternate from stereo to mono to reduce multi-path noise when listening to the FM station. Display "CRSC: ON" "CRSC: OFF" Setting The CRSC is ON. The CRSC is OFF. • Strong electrical fields (such as from power lines) may cause unstable sound quality when CRSC is turned ON. In such a situation, turn it OFF. program) is received, the Receive mode will automatically switch to Analog broadcast only.
• "AUX"/ "AUX EXT" • "DVD" • "Portable" • "Game" • "Video" • "TV" 6 Exit Menu mode Press the [MENU] button. • When operation stops for 10 seconds, the name at that time is registered, and the Menu mode closes. • The Auxiliary Input Display can be set only when the built-in auxiliary input or the auxiliary input of optional KCA-S210A is used. In Standby mode CD Read Setting When there is a problem with playing a CD with special format, this setting plays the CD by force.
Menu system In Standby mode Picture downloading Downloading wallpapers. You can use downloaded pictures for the display of this unit. 1 Inset a CD-R/CD-RW. Insert a CD-R/CD-RW containing files to be downloaded into this unit. Refer to (page 33) for details. Our URL http://www.kenwood.net-disp.com describes how to make CD-R/CD-RW. 2 Enter Standby Press the [SRC] button. Select the "STANDBY" display.
In CD mode Unique ID display Displaying the serial number for each product. 1 Select the unique ID display mode Push the Control knob towards [4] or [¢]. Select the "ACD Unique ID" display. 2 Display the unique ID Push the Control knob towards [FM] or [AM]. In Standby mode Demonstration mode Setting Sets the demonstration mode. 1 Select the Demonstration mode Push the Control knob towards [4] or [¢]. Select the "DEMO Mode" display.
Basic Operations of remote control 43$ 70- 32# "55 !44 6/, "6% !5$ &D '. ". o D !-n :/.% $)2%#4 /+ !"# $%& '() *+, -./ 023 456 789 %*3&$5 1: 2 6/, Loading and Replacing the battery Use two "AA"-size batteries. Slide the cover while pressing downwards to remove it as illustrated. Insert the batteries with the + and – poles aligned properly, following the illustration inside the case. Basic operations [VOL] buttons Adjusts the volume.
Audio Control In Disc source [AUD] button Selects the Audio item to be adjusted. [4]/ [¢] buttons Going forwards and backwards between track/ files. [VOL] buttons Adjusts the Audio item. • Refer to
Basic Operations of remote control In HD Radio source [FM] button Selects the HD FM band. Each time you press the [FM] button, the band alternates between the HF1, HF2, and HF3 bands. [AM] button Selects the HD AM band. [4]/ [¢] buttons Tunes up or down bands. [0] — [9] buttons Press buttons [1] — [6] to recall preset stations. In DAB source [FM] button Preset Band Switching. Each press of the [FM] button switches one step among the DB1, DB2, and DB3 bands. [AM] button Primary/Secondary Switching.
Accessories/ Installation Procedure 2WARNING Accessories 1 ..........1 2 ..........2 3 ..........4 4 ..........4 5 ..........1 Installation Procedure 1. To prevent a short circuit, remove the key from the ignition and disconnect the - battery. 2. Connect the proper input and output wire to each unit. 3. Connect the speaker wires of the wiring harness. 4. Connect the wiring harness wires in the following order: ground, battery, ignition. 5. Connect the wiring harness connector to the unit. 6.
Connecting Wires to Terminals Subwoofer right output (Red) Subwoofer left output (White) -1 7"" , Rear right output (Red) Rear left output (White) Front right output (Red) , , To KENWOOD disc changer/ External optional accessory ," / Front left output (White) To connect these leads, refer to the relevant instruction manuals.
Installation non-Japanese cars Japanese cars 1 Refer to the section (page 61) and then remove the hard rubber frame. Align the holes in the unit (two locations on each side) with the vehicle mounting bracket and secure the unit with the accessory screws. T N N T/N T Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place.
Installation Screwing the Faceplate on the Unit If you want to fasten the faceplate to the main unit so that it does not fall off, screw in the provided screws in the holes shown below. Bottom panel Accessory5 • Never insert the screw in any other screw hole than the one specified. If you screw them in another hole, it will contact and may cause damage to the mechanical parts inside the unit. 60 | English B64-3058-00_K_English.Indd 60 05.4.
Removing the Unit Removing the hard rubber frame 1 Engage the catch pins on the removal tool and remove the two locks on the upper level. Upper the frame and pull it forward as shown in the figure. Lock Catch Removing the Unit 1 Refer to the section (page 61) and then remove the hard rubber frame. Remove the screw (M4 × 8) on the back panel. Insert the two removal tools deeply into the slots on each side, as shown.
Troubleshooting Guide What may seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. ? No sound can be heard, or the volume is low. ✔ The fader or balance settings are set all the way to one side. ☞ Center the fader and balance settings. ✔ The input/output wires or wiring harness are connected incorrectly. ☞ Reconnect the input/output wires or the wiring harness correctly.
Tuner source ? ? ? Radio reception is poor. ✔ The car antenna is not extended. ☞ Pull the antenna out all the way. ✔ The antenna control wire is not connected. ☞ Connect the wire correctly, referring to the section on . The desired frequency cannot be entered with the Direct Access Tuning. ✔ A station that cannot be received is being entered. ☞ Enter a station that can be received. ✔ You are trying to enter a frequency with a 0.01 MHz unit.
Troubleshooting Guide The messages shown below display your systems condition. Eject: No disc magazine has been loaded in the changer. The disc magazine is not completely loaded. ➪ Load the disc magazine properly. No CD in the unit. ➪ Insert the CD. No Disc: No disc has been loaded in the disc magazine. ➪ Load a disc into the disc magazine. TOC Error: No disc has been loaded in the disc magazine. ➪ Load a disc into the disc magazine. The CD is quite dirty. The CD is upsidedown.
English | B64-3058-00_K_English.Indd 65 65 05.4.
Specifications Specifications subject to change without notice. FM tuner section Frequency range (200 kHz space) : 87.9 MHz – 107.9 MHz Usable sensitivity (S/N = 30dB) : 9.3dBf (0.8 µV /75 Ω) Quieting Sensitivity (S/N = 50dB) : 15.2dBf (1.6 µV /75 Ω) Frequency response (±3.
B64-3058-00_K_English.Indd 67 05.4.
B64-3058-00_K_English.Indd 68 05.4.
