Use and Care Manual

ManualsBrandsPhenopatch ManualsPaint8 oz. Premium-Grade Patch-N-Paint Lightweight Spackling

PHENOMENAL BRANDS, Phenopatch Products

a division of DAP Products Inc.

2400 Boston Street, Suite 200, Baltimore, Maryland 21224

Phone: 410-675-2100

Revised: 3/15/13

DAP



PHENOPATCH

PATCH-N-PAINT

Lightweight Spackling

 Patch & prime in one step

 Microsphere Technology – Provides ultra smooth surface for painting & hiding of repair

 Fast drying – paint in minutes

 Won’t shrink/crack

 No sanding

 Easy one strike application

 Interior/exterior

 Low VOC (Per CA Air Resource Board Test Method 310)

 Low odor

Packaging: 8 FL. OZ., 32 FL. OZ., 1 Gallon

Color: Off White

UPC Numbers: 70798 01602, 01611, 01517

Company Identification:

Manufacturer: PHENOMENAL BRANDS, Phenopatch Products, a division of DAP Products Inc.,

2400 Boston St., Baltimore, Maryland 21224

Usage Information: 1-888-327-8477 or visit dap.com and click on “Ask the Expert”

Order Information: 1-800-327-3339

Fax Number: 410-558-1068

Also, visit the Phenopatch website at www.phenopatch.com.

Product Description:

DAP

PHENOPATCH

PATCH-N-PAINT

Lightweight Spackling lets you patch and prime in one

easy step, saving time and money. It dries fast with no need to sand or prime, letting you paint in minutes.

It is easy to apply with one strike of the putty knife. The advanced, lightweight formula with Microsphere

Technology provides an ultra smooth surface for exceptional hiding of the repair once painted. Won’t crack

or shrink. Ideal for repairing holes, cracks and dents in drywall, plaster, wood and stucco.

DAP

PHENOPATCH

PATCH-N-PAINT

Lightweight Spackling has low VOC content (per CA Air

Resources Board Test Method 310) and is low in odor. Interior/exterior use.

Suggested Uses:

Ideal for filling holes, cracks, crevices, dents or defects in:

 Drywall

 Wood

 Plaster

 Stucco

Summary of content (3 pages)

PAGE 1
PHENOMENAL BRANDS, Phenopatch Products a division of DAP Products Inc.
PAGE 2
Surface Preparation & Application:  Surface must be clean, dry and free of foreign material.  Mix gently before use.  Using a clean putty knife, press spackling into hole or crack. Draw blade firmly across the surface to remove excess material in one strike.  For a smoother finish, dip putty knife into water and lightly smooth spackling.  One coat should be sufficient for small repairs. May be painted within minutes with a latex paint. Follow paint manufacturer’s instructions for application.
PAGE 3
application, drying and sanding. Dry sanding of this product may generate dust. Inhalation of dust may cause lung damage or other adverse pulmonary and respiratory effects. When sanding, wear a NIOSH‐approved dust mask. Follow dust mask manufacturer’s directions for use. Keep exposure below OSHA permissible exposure limits. Avoid contact with eyes, skin and clothing. Wear gloves and safety glasses. Close container after use. Wash thoroughly after handling.