Enjoy Your USE AND CARE GUIDE E02GR009 Assembly, Care And Use Instructions Read Carefully Important:Retain These Instructions For Future Reference. E02GR001 h This appliance is for Household use only. This is not a commercial appliance. Questions, problems, missing parts? Before returning to the store, please contact our Customer Service service@alphamarts.com THANK YOU inually create quality products designed to enhance your home.
ENJOY YOUR CAPTIVA DESIGNS Table of Contents Warnings 2-7 Troubleshooting 20 Components & Hardware Lists 8 First-Time Operation 21-22 Preparation 9 Care and Maintenance 23-24 Assembly Instructions 9-16 Operation Instructions 17-19 Warranty 25 Safety Information Assembler/Installer This instruction manual contains important information necessary for the proper assembly and safe use of this appliance. Read and follow all warnings and instructions before assembling and using this appliance.
ENJOY YOUR CAPTIVA DESIGNS GAS GRILL Built from lasting materials and designed to withstand unreasonably harsh testing, this powerful grill outperforms its weight class. For our customers, our clients, our friends, our lifelong partners becoming true cookout champions on a Captiva Designs gas grill means proudly joining the family. There’s always room around our table for one more. Three fires ignite our spirit: Craftsmanship. We believe building better grills is a balance between form and function.
PROP 65 WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds), which are known to the State of California to cause cancer and birth defects or other reproductive harm.For more information visit www.P65Warnings.ca.gov. IMPORTANT SAFETY Please read this manual carefully and before installing or using your Captiva Designs gas grill to ensure proper operation, installation, and servicing, and to reduce the risk of fire, burn hazard, and/or other injury.
ENJOY YOUR CAPTIVA DESIGNS Warnings This gas grill must be installed in accordance with all local codes. If installation is planned in an area with no local codes, your gas grill must be installed in accord with the National Fuel Gas Code with the National Fuel Gas Code ANSI Z223.1, and storage and handling of CSA B149. 2 propane installation code. This grill is for outdoor use only. The manufacturer cannot be held responsible for damage or injury caused by improper use of this appliance.
ENJOY YOUR CAPTIVA DESIGNS Warnings For proper operation, burners must be aligned with the valve orifice and seated in the bracket slot. This is accomplished by first placing the burner tube’s shutter hole securely over the valve orifice, and ensuring the male post on the rear of the burner rests in the opening in the grill chassis. Failure to do so could result in a fire and/or injury.
ENJOY YOUR CAPTIVA DESIGNS Warnings GENERAL WARNINGS All gas grills get hot during use. Use extreme caution when operating. 3 Do not touch hot surfaces. Always use the lid handle to open or close the grill. Use cooking utensils with wood handles and insulated oven mitts when operating the grill. Never lean over the cooking surface when lighting or operating the grill.
ENJOY YOUR CAPTIVA DESIGNS Package Contents 16 1 2 18 19 27 20 29 3 28 4 7 8 21 5 22 24 25 23 26 9 10 15 13 12 Part Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Quantity Description E02GR009 E02GR001 Lid & Body assembly Left side table Left front panel Door Handle Left Door Left cart assembly Bottle opener Cart frame Back panel Bottom plate Right cart assembly Locking Caster Magnet base Non-Locking Caster Right Door Picture Part No AA BB CC DD EE FF GG HH II JJ Name Bolt Bolt Door post D
ENJOY YOUR CAPTIVA DESIGNS Preparation Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list on previous page and hardware contents below. If any part is missing or damaged, do not attempt to assemble the product. Contact customer service for replacement parts. Estimated Assembly Time: 50 minutes with 2 people.
ENJOY YOUR CAPTIVA DESIGNS Assembly Instructions Assemble the back panel (9) to the left cart assembly(6) and right cart assembly (11) using M6x12mm bolts (AA). 2 First assemble the Door post (CC) to the Bottom plate. Then assemble magnet base (13) to the bottom plate using M5x10mm bolts (BB).
ENJOY YOUR CAPTIVA DESIGNS Assembly Instructions First assemble the Handle (4) and match holder (26) to the right door (15) using M4x5mm bolts (EE) and washer (FF). Then assemble the right door to the Bottom plate (10) and cart frame (8) using door axle (DD). 4 Install the left door as above. Assemble the lid handle (28) and Thermal insulation wash (29) using M6x12mm bolts (AA) to the lid.Assemble the Thermometer (27) to the lid.
ENJOY YOUR CAPTIVA DESIGNS Assembly Instructions First Assemble the M6x12mm to the body, reserve distance of 5mm. Then fix the left side table to the body using M6x12mm bolts (AA). 6 O First Assemble the Bottle opener (7) to the left front panel (3) using M4x10mm bolts(JJ). Assemble the M6x12mm to the the left front panel, reserve a distance of 5mm. Then fix the left front panel (3) to the body using M5x10 bolts (BB).
ENJOY YOUR CAPTIVA DESIGNS Assembly Instructions First, assemble the M6x12mm bolts (AA) to the body, reserve a distance of 5mm. Then fix the side burner table (20) to the body using M6x12mm bolts (AA). 8 First, assemble the M6x12mm bolt (AA) to the right front panel (21), keep a distance of 5mm. Then assemble the right front panel (21) to the control panel and side burner table using M5x10mm bolts (BB).
ENJOY YOUR CAPTIVA DESIGNS Assembly Instructions Assemble the side valve and knob base (22) to the right front panel using M4x8mm bolts (GG). First, align to the side valve and side burner (24) then assemble it to the side burner table using M4x8mm bolt (GG). Correct Correct Incorrect 10 Correct Incorrect Incorrect Incorrect Incorrect Incorrect WARNING: IT IS VERY IMPORTANT TO CHECK AND ENSURE THAT EACH AND EVERY BURNER IS FULLY ENGAGED WITH THE ADJACENT VALVE ORIFICE BEFORE COMPLETING STEP 10.
ENJOY YOUR CAPTIVA DESIGNS Assembly Instructions Assemble the knob (23) to the side valve Assemble the ignition pin to the side burner table using M4x8mm bolts (GG). Remove the ignitor cap,insert AA battery(1.5V) into the ignitor body with the positive “+” end facing out ,replace ignitor cap. 11 Assemble the side burner rack(19) to the side burner table, put the warming rack(16) ,cooking grills(17),flame tamer (18) into the body.
ENJOY YOUR CAPTIVA DESIGNS Assembly Instructions Attach the grease box (25) to the grease tray 13 Complete Installing 16
ENJOY YOUR CAPTIVA DESIGNS Operation Instructions 3 CHECKING FOR LEAKS After all connection are made, check all connections and fittings on the LP gas tank valve, gas hose and regulator for leaks with a water and soap solution. To prevent fire or explosion while testing for a leak: • Always perform leak test prior to lighting the grill. • Do not smoke while testing for a leak. • Always perform leak tests outdoors in a well-ventilated area. • Do not use the grill until any and all leaks are corrected.
ENJOY YOUR CAPTIVA DESIGNS Operation Instructions 3 CONNECTING GAS CYLINDER The propane gas supply cylinder to be used must be constructed and marked in accordance with the specifications for LP gas Cylinders of the U.S. Department of Transportation(D.O.T) or the National Standard of Canada, CAN/CSA-B339, Cylinders, Spheres and Tubes for Transportation of Dangerous Goods; and Commission, as applicable; and provided with a listed overfilling prevention device. Use only 20-pound cylinders (height: 18.
ENJOY YOUR CAPTIVA DESIGNS Operation Instructions NOTE: Other cylinders may be acceptable for use with this appliance if they are compatible with the appliance nesting hole and retention means. Refer to Page 16 of the Assembly Instructions for correct cylinder to cylinder holder connection. WARNING: ALL INSTRUCTIONS AND SAFEGUARDS ON THIS PAGE MUST BE FOLLOWED TO PREVENT FIRE, DAMAGE AND/OR INJURY. CONNECTING THE LP TANK 1. The knob on the LP tank must be closed.
ENJOY YOUR CAPTIVA DESIGNS Troubleshooting Problem Solution Possible Cause 1. Carefully follow the lighting procedures outlined on Pages 21-22. Remember, all gas grill valves must be in the OFF position when the tank valve is turned on. Slowly turn the tank on to allow pressure to equalize. 2. Preheat the grill with both main burners on high for 10–15 minutes. Low heat or low flame 1. For propane: improper when valve is turned lighting procedure. to high. Excessive flare-ups/ uneven heat. 1.
ENJOY YOUR CAPTIVA DESIGNS First-time Operation Prior to using your Captiva Designs gas grill, verify that all of the following is true: • The burner tube is free of any debris or obstruction. • The proper gas type, gas connection, and regulator settings have been installed. • You’ve checked for gas leaks. • Minimum clearances listed on certification tag are maintained. • All packaging has been removed. • All parts and components are properly in place.
ENJOY YOUR CAPTIVA DESIGNS First-time Operation 4. Push in and turn the control knob to Max. 5. If the burner does not light after 5 seconds, turn the control knobs to the OFF position. 6. Wait 5 minutes until the gas clears before attempting to light again. 7. If the burner does not light after several attempts, immediately close all gas valves and consult an authorized service technician. 3 WARNING: “Flash-back” may occur in or around the burner tubes.
ENJOY YOUR CAPTIVA DESIGNS Care and Maintenance Cooking Grates The best time to ‘burn-off’ the cooking grates is after every use (approx. 15 minutes). The grill is already hot from cooking thus requiring less fuel to obtain necessary temperature for ‘burn-off’. To ‘burn off’ or heat clean your grill, turn the burners to highest position and run for 15 minutes with the lid closed. Then turn off the burners and use a wire brush to clean excess food residue from the grates.
ENJOY YOUR CAPTIVA DESIGNS Care and Maintenance Burner Assembly Removing The Burner Assembly 1. Make sure all control knobs are in the OFF position, the LP gas supply valve has been closed, and the gas hose is disconnected from the gas supply. 2. Open lid and remove warming rack, cooking grates, heat tents, clip for burner, ignition chain and main burners. 3.Slide the burner forward and out of the firebox. 4.Detach ignition wire from electrode. Cleaning the Burner Assembly – Make sure the grill is cool 1.
ENJOY YOUR CAPTIVA DESIGNS Warranty The warranty is for original owners only at the original site of delivery, and cannot be transferred to new owners. You must retain your sales slip or invoice. Captiva Designs grills are warrantied for single-family/residential use only for main frame for one (1) year from the date of the original owner. 3 Installation, repair, and maintenance work should be performed by an authorized service technician.