Instructions / Assembly

Assembly Instructions

First assemble the Handle (4) and match holder (26) to the right door (15) using M4x5mm bolts (EE) and washer

(FF). Then assemble the right door to the Bottom plate (10) and cart frame (8) using door axle (DD).

Install the left door as above.

Assemble the lid handle (28) and Thermal insulation wash (29) using M6x12mm bolts (AA) to the lid.Assemble the

Thermometer (27) to the lid.First remove the stronger, assemble the Lid & body assembly (1) to the cart left &right

cart assembly using M6x12 mm bolts (AA) and M6 nuts (II).

ENJOY YOUR CAPTIVA DESIGNS