Instructions / Assembly
Assembly Instructions
14
Assemble the side valve and knob base (22) to the right front panel using M4x8mm bolts (GG).
First, align to the side valve and side burner (24) then assemble it to the side burner table using M4x8mm
bolt (GG).
10
Correct
Incorrect
Incorrect
Correct
Incorrect
Incorrect
Correct
Incorrect
Incorrect
ENJOY YOUR CAPTIVA DESIGNS
WARNING: IT IS VERY IMPORTANT TO CHECK AND ENSURE THAT EACH AND EVERY BURNER IS
FULLY ENGAGED WITH THE ADJACENT VALVE ORIFICE BEFORE COMPLETING STEP 10. FAILURE TO
DO SO MAY RESULT IN FIRE OR EXPLOSION, POSSIBLY CAUSING SERIOUS INJURY OR DEATH.
REFER TO MAINTENANCE SECTION INSTRUCTIONS TO PROPERLY CHECK THE ENGAGEMENT.