User Manual

- Press and hold the [CALL/POWER] Button for 2 seconds to turn the power on.
- When turning the power off, press and hold the [CALL/POWER] Button for 2.5 seconds to turn off.
(While on an incoming call, you cannot power off the device.)
- When turning power on/off, there is a vibration notification that rings.
※ Pairing mode will start once the power is turned on for the first time after purchase.
※ When the BT 100 NC is not in use, ensure the NC function is switched OFF. If left in the ON position,
this will cause the battery to run out.
2) Connection Waiting Mode
- When power is turned on, ‘Connection Waiting Mode’ will start if ‘Pairing Mode’ cannot be entered or
the earphones cannot connect with ‘Bluetooth Device’.
- If the ‘Bluetooth Device’ is not connected within 5 minutes in ‘Connection Waiting Mode’, the
earphones will automatically turn off.
Status LED Indicator
Connection Waiting Mode Blue light blinks twice in 6 second intervals
6. PAIRING WITH A ‘BLUETOOTH DEVICE’
1) Pairing
- Turn on the Bluetooth feature with the ‘Bluetooth Device’ you want to connect with the BT 100 NC.
- Place the BT 100 NC within 3 feet of the ‘Bluetooth Device’ you want to connect.
- Press and hold the PLAY Button for over 2.5 seconds with the BT 100 NC power on to enter Pairing
Mode.
Status LED Indicator Voice Guidance
Pairing Mode
Blue and Red light
alternately blinks
Pairing Mode activated
- Within the 'Bluetooth Device’ you want to connect, search/select ‘BT 100 NC’.
Status Operation LED Indicator Vibration Notification
ON
Press and hold the CALL/
POWER button for 2 seconds
Purple light turns
on for 1 second
Vibrates once for 0.3 second
OFF
Press and hold the CALL/
POWER button for 2.5 seconds
Red light blinks
5 times
Vibrates twice for 0.3 second