User Manual

Incoming Bell/Outgoing Bell
Purple light blinks in 1.5 second intervals
During Call
When there are two calls connected
Blue light slowly blinks every 6 seconds
Purple light slowly blinks every 6 seconds
13. USING THE CALL FUNCTION
Call/Bluetooth
Power Button
(+) Button
Play Button
(-) Button
1) Accepting a Call
- When the incoming call tone is heard through the
earphones, press the CALL/POWER button.
(Adjusting Call Volume: to control the call volume,
- Press the (+)/(-) Button).
2) Ending a Call
- While on a call, shortly pressing the CALL/POWER
button to end the call.
3) Rejecting a Call
- When the incoming call tone is heard through the
earphones, press and holds the CALL/POWER
button for about 1 second. (The 'Call Ignored' voice
guidance is provided and the incoming call is rejected).
4) Turning Mute On/Off
- While on a call, Press the (-) Button for about 1 second to mute sound. To turn back on, Press
the (-) Button again for about 1 second.
5) Making a Call
- Press and hold the CALL/POWER button for about 1 second. The 'Redialing' voice guidance is
provided and a call is connected with the most recent number.
※This feature may slightly differ depending on your 'Bluetooth Device'.
6) Call Waiting
- When there is another incoming call while on a call (supported only when having applied for
this service with your telecom provider).
- Press and hold the CALL/POWER button for about 1 second to place the current call on call
waiting and connect the second call (Press the CALL/POWER button again for about 1 second
to switch between the waiting call and connected call).
- Shortly press the CALL/POWER button to end the current call and connect the second call.
7) Calling by Voice (supported within mobile phones that support the voice command feature).
- While waiting, shortly press the CALL/POWER button.
8) Switching between the Device and Mobile Phone
- To switch the call from mobile phone to the headphone, press the CALL button for 1 second.
9