User Manual

Status LED Indicator Voice Guidance

Pairing Mode

Blue and red light

alternately blinks

Pairing Mode

Activated

Operation LED Indicator Voice Guidance

Connection Successful Purple light blinks twice Device Connected

6. PAIRING WITH A BLUETOOTH DEVICE

1) Pairing

- Turn on the Bluetooth feature with the ‘Bluetooth

Device’ you want to connect with the BT 220 NC.

- Place the BT 220 NC within 3 feet of the ‘Bluetooth

Device’ you want to connect.

- Press and hold the PLAY button for over 3 seconds

with the BT 220 NC power on to enter Pairing Mode.

Play Button

for 3 Sec.

Search “BT 220 NC”

2) Re-connecting a Disconnected Device

① Auto Connection

- Once the device has been paired with a Bluetooth device, it will automatically be connected to a

previously connected device once the BT 220 NC power is turned on.

If Bluetooth becomes disconnected as the discover range between the Bluetooth device and the

BT 220 NC is exceeded, then Bluetooth will not be automatically re-connected.

When you are back within the discover range (30 feet), you must then connect manually.

② Manual Connection ‒ When having entered ‘Connection Waiting Mode’ during connection

- Press the CALL/POWER button or the PLAY Button on the headphone to connect.

The BT 220 NC will also be connected if you select ‘BT 220 NC’ from the device search list within

your ‘Bluetooth Device’.

- Within the 'Bluetooth Device’ you want to connect,

search/select ‘BT 220 NC’.

※ If the “Bluetooth device” requires a PIN CODE or

password enter ‘0000’.

- Use the earphones to play music or connect a call.

3) Checkpoints upon Pairing

- Check to see whether the Bluetooth feature is activated within the 'Bluetooth Device' you want to

connect.

- When selecting the connection device, connect by selecting stereo headset device.

Music cannot be played when connected through mono headset.

※ In order to properly use the Bluetooth feature of this device, the proﬁle (A2DP, HSP, HFP and AVRCP)

of the 'Bluetooth Device' you are trying to connect must support the profile of this device.

* A2DP–“Advanced Audio Distribution Profile”, HSP–“Headset Profile”, HFP–“Handsfree Profile”.

3 feet