User's Manual

150Mbps Wireless N Access Point
www.phicomm.com
2
Chapter 1: Introduction
The front panel of the wireless Access Point includes 4 LED indicators, as explained in table
below:
LED Status Indication
POWER
On Power is on
Off Power is off
LAN
On There is a successful connection on the LAN port
Off There is no connection on the LAN port
Blinking Data is being transferred over the LAN port
WLAN
On The wireless function is enabled
Off The wireless function is disabled
Blinking Sending or receiving data over wireless network
WPS
On A wireless device is successfully connected to the network by WPS function
Off WPS function is deactivated
Blinking A wireless device is connecting to the network by WPS function
Rear Panel
The rear panel of the wireless Access Point includes 1 power ON/OFF switch, 1 power connector,
1 LAN port, 1 Reset button, 1 WPS button and 1 antenna, as explained in table below: