User's Manual

150Mbps Wireless N ADSL2/2+ Modem Router

www.phicomm.com

Chapter 3: Quick Installation

7) Select Obtain an IP address automatically and Obtain DNS server address automatically.

Then click OK.

Install Your Modem Router

To configure the device, you can either run the Resource CD or run the Web based Setup Wizard.

For first-time installation we recommend running the Resource CD, follow the step-by-step

instructions to finish the installation. After the initial configuration is done, you can login to the

Web based Setup Wizard to do some additional settings. Here we introduce how to set it up via

Web based Setup Wizard.

Step 1: Open your web browser, in the address bar, type in 192.168.1.1

Step 2: You are prompt to enter the Username/Password (preset as admin/admin) which you

can found on the label attached to your Wireless Modem Router, and then click OK.