User's Manual

150Mbps Wireless N ADSL2/2+ Modem Router
www.phicomm.com
25
Chapter 4: Software Configuration
Server IP: Enter the DHCP server IP address runs on WAN side.
Note: If you select Disabled, the DHCP function will not take effect. DHCP Relay may be no use if
default route is not dynamic or static routing mode!
Add DHCP Reservation: Assign a static IP for some certain computer.
DHCP Clients List: Show the current clients’ information which are connected to this Wireless
Modem Router.
Wireless
Access Point Settings: These are the settings of the access point. You can configure the rules to
allow wireless-equipped computers and other devices to communicate with a wireless network.
Access point: Select Activated to allow wireless station to associate with the wireless access
point