User's Manual

150Mbps Wireless N ADSL2/2+ Modem Router
www.phicomm.com
34
Chapter 4: Software Configuration
QoS: Select this option to Activate/Deactivate the IP QoS on different types.
Discipline: Choose WRR or Strict Priority
WRR weight: Set the priority weight.
Rule: Configure the rules for QoS. If the traffic complies with the rule, then the Wireless Modem
Router will take the corresponding action to deal with it.
Rule Index:
Destination MAC & IP & Mask & Port Range: Enter the information about the Destination host
for the rule.
Source MAC & IP & Mask & Port Range: Enter the information about the Source host for the
rule.
Select the index for the rule you want to configure.
Active: You can active or deactive this function, the rule can take effect only when it is activated.
Application: Select the application that the rule aimed at.
Physical Ports: Select the port whose traffic flow are controlled by the rule.
Protocol ID: Select one among TCP/UDP, TCP, UDP or ICMP protocols for the application.
Vlan ID Range: Enter the Vlan range, and the rule will be effective to the selected Vlans.
IPP/DS Field: Select the type of the action to assign the priority. When you select IPP/TOS, you
can assign the priority via IP information. IP QoS function is intended to deliver guaranteed as