User's Manual

150Mbps Wireless N ADSL2/2+ Modem Router
www.phicomm.com
37
Chapter 4: Software Configuration
SNMP
The SNMP (Simple Network Management Protocol) is used for exchanging information between
network devices.
Get Community: Set the password for the incoming get and get next requests from the
management station.
Set Community: Set the password for incoming set requests from the management station.
UPnP
UPnP (Universal Plug and Play) is a distributed, open networking standard that uses TCP/IP for
simple peer-to-peer network connectivity between devices. An UPnP device can dynamically
join a network, obtain an IP address, convey its capabilities and learn about other devices on the
network. In turn, a device can leave a network smoothly and automatically when it is no longer
in use. UPnP broadcasts are only allowed on the LAN.
UPnP: Activate or Deactivate the UPnP function. Only when activated is chosen can the UPnP
take effect.
Auto-Configured: If you activate the function, then the UPnP network devices can
automatically configure network addressing, announce their presence in the network to other
UPnP devices and enable exchange of simple product and service descriptions.